OWNER’S MANUAL
Table of Contents Introduction .................................................................. 3 Box Contents ................................................................ 3 Controls & Connections ................................................ 4 System Routing Diagram .............................................. 6 Minimum Requirements ..............................................
Introduction ® The new Electrix Ebox-‐44 is the perfect audio interface for mobile applications, budget studios, computer DJ’s, or even home use to convert your vinyl or CD collection to digital audio files. It is fully USB bus powered, which means it can be connected on the fly and used anywhere with just a laptop.
Controls & Connections 1. Headphone Jack – Connect your headphones to this jack to monitor the inputs while recording. 2. Headphone Volume – Controls the headphones output level. 3. Microphone Volume – Controls the microphone input level. 4. Microphone Input – Connect your microphone to this jack 5.
Controls & Connections 10. Output A LED’s – Indicator LED’s will light when a signal is present for outputs 1 and 2. 11. Output B LED’s – Indicator LED’s will light when a signal is present for outputs 3 and 4. 12. Input A LED’s – Indicator LED’s will light when a signal is present for inputs 1 and 2. 13.
System Routing Diagram Minimum System Requirements PC Pentium III 600M MHz Windows 98SE, ME, 2000, XP, Vista, Windows7 operating system 128MB RAM USB port Mac Power Macintosh G3 or higher Mac OS X 10.
Windows ASIO Driver Installation Insert the installation CD into your computer’s CD drive and select the file “Setup.exe” to begin the installation. 1.Select the desired language and click “OK” 2. Click “Install the Driver” The installer will attempt to uninstall earlier drivers, if any.
3.When prompted by the installer, connect the interface to a USB port on your computer. 4. Click “Reboot Now” is you are ready to use the interface, or click “Reboot Later” if you need to perform additional installations.
MacOS Core Audio Driver Installation Insert the installation CD into your computer’s CD drive and select the file ““ELECTRIX_EBOX44_2.0.10.mpkg”” to begin the installation. 1.Click “Continue” 2.
3.You need to restart your computer to complete the installation. Save and quit any open applications and click “Continue Installation” 4. Click “Restart” to finish installing the driver.
Using the Control Panel Windows Open the Ebox-‐44 Control Panel by clicking on the icon in the taskbar. With the control panel you can adjust the input and output levels individually, or in stereo pairs by selecting “Gang” for each I/O pair.
Using the Control Panel MacOS Navigate to your Applications folder and double click the file “Electrix Ebox-‐44 Control Panel” to launch the control panel. With the control panel you can adjust the input and output levels individually, or in stereo pairs by selecting “Gang” for each I/O pair.
1 Technical Specifications Power source Dimensions Accessories Weight Sample Rate Resolution Line Outputs Line out load Output Level Output THD Frequency Response S/N Ratio Channel Separation Headphone Output Phones load Output Level Output THD Frequency Response S/N Ratio Channel Separation USB 5V，500mA 4.
2 Technical Specifications Line Inputs Input Impedance & Sensitivity Frequency Response THD+N S/N Ratio Channel Separation Maximum Input Phono Inputs Input Impedance & Sensitivity Frequency Response THD+N S/N Ratio Channel Separation Maximum Input MIC Inputs Input Impedance & Sensitivity Frequency Response THD+N
Warranty Electrix warrants this product to be free from defects in materials and workmanship under normal use for a period of (1) year from the date of purchase, as evidenced by the purchase receipt. During the warranty period, Electrix shall repair or replace the product if defective.
Electrix is a division of Mixware, LLC th 14730 NE 95 Street, BLDG 9 Redmond, WA 98052 Tel: (786) 362-‐5757 Fax: (786) 362-‐5756 info@mixware.net www.electrixpro.
