Owner`s manual

ManualsBrandsElectro-Air ManualsAir CleanerEASASD-18ASC

OWNER’S MANUAL

MODELS EASASD-10ASC, EASASD-11ASC

EASASD-12ASC, EASASD-18ASC

ELECTRONIC AIR CLEANERS

IMPORTANT: PLEASE READ MANUAL BEFORE OPERATING UNIT

Features

Lifetime Filter System never needs replacing

Electronically removes dust, mites, pollen, pet dander, tobacco smoke, cooking smoke

and grease, mold, fungi, bacteria, viruses and more, down to 0.01 micron

Dual Voltage, Aluminum Collecting Cells are durable and easy to maintain

Cell Guide ensures proper placement of collecting cells

Activated Carbon Filters remove unpleasant odors

Electronic Air Proving Switch for quick wiring

Dual Indicator Lights show Air Cleaner is working at a glance

Galvanized Steel Cabinet for solid vertical or horizontal installation

Durable Scratch-Resistant powder coat paint finish resists corrosion

Summary of content (16 pages)

PAGE 1
OWNER’S MANUAL MODELS EASASD-10ASC, EASASD-11ASC EASASD-12ASC, EASASD-18ASC ELECTRONIC AIR CLEANERS IMPORTANT: PLEASE READ MANUAL BEFORE OPERATING UNIT Features Lifetime Filter System never needs replacing Electronically removes dust, mites, pollen, pet dander, tobacco smoke, cooking smoke and grease, mold, fungi, bacteria, viruses and more, down to 0.
PAGE 2
WARNING IMPORTANT: Please read entire instructions before installing the Electronic Air Cleaner. Before beginning any installation or modification, be certain that the main line electrical disconnect switch is in OFF position. Electric shock could result. Tag disconnect switch with suitable warning labels.
PAGE 3
Table 1 — SPECIFICATIONS MODEL EASASD-10ASC EASASD-11ASC EASASD-12ASC EASASD-18ASC House Size Area <2400 ft² <222.96 m² <3000 ft² <278.70 m² <3000 ft² <278.70 m² >3000 ft² >278.70 m² Airflow up to 1200 CFM up to 2040 m³/hr up to 1400 CFM up to 2380 m³/hr up to 1400 CFM up to 2380 m³/hr up to 2000 CFM up to 3400 m³/hr Duct Size 16 x 20 in 40.5 x 51.0 cm 16 x 25 in 40.5 x 63.5 cm 20 x 20 in 51.0 x 51.0 cm 20 x 25 in 51.0 x 63.5 cm Unit Weight 35 lbs 15.9 kg 37 lbs 16.8 kg 37 lbs 16.
PAGE 4
Fig. 3 — DIMENSIONS DIMENSIONS — in (cm) MODEL A B C D E F G H EASASD-10ASC 19.8 (50.4) 15.9 (40.5) 23.2 (58.9) 13.1 (33.3) 20.7 (52.5) 1.3 (3.2) 23.7 (60.2) 21.2 (53.9) EASASD-11ASC 19.8 (50.4) 15.9 (40.5) 26.1 (66.3) 13.6 (34.6) 24.1 (61.2) 1.0 (2.5) 26.6 (67.7) 25.8 (65.4) EASASD-12ASC 24.7 (62.8) 20.8 (52.9) 21.2 (53.9) 18.0 (45.7) 18.7 (47.5) 1.3 (3.2) 21.7 (55.2) 21.2 (53.9) EASASD-18ASC 24.7 (62.8) 20.8 (52.9) 25.8 (65.4) 18.0 (45.7) 23.3 (59.1) 1.3 (3.
PAGE 5
WARNING Electronic Air Cleaner Installation Electrical shock can cause injury or death. Be certain main line disconnect switch is off before wiring. 1. Remove existing equipment filter. Thoroughly clean fan compartment and ductwork where Air Cleaner is to be installed. 2. Open access door. Slide filters and collecting cells out of cabinet. 3. Place cabinet in ductwork. Holes are provided to attach cabinet to ductwork or equipment.
PAGE 6
3. Rinse cells well with hot water (maximum 120°F/ 49°C). 4. To remove contaminate from the ionizing wires, use an old toothbrush. Slide the brush bristles over the wire and gently drag the brush up and down the wire once. Be very careful when cleaning the wires as they become very brittle with age. 5. If dirt remains, let cells soak in a solution of DAX Detergent and water for 30 minutes. 6. Tilt cells on 45° angle on their short side, with arrows pointing sideways.
PAGE 7
functions: 1. Turn Air Cleaner power switch OFF. 2. Turn off system fan. 3. Open access door. 4. Remove collecting cells from Air Cleaner. 5. Remove the used carbon filters from Air Cleaner. 6. Put new carbon filters into Air Cleaner. Space filters evenly across the discharge opening of Air Cleaner. Never put more than 3 carbon filters in the Air Cleaner, as this may cause a problem with airflow. APS output with the jumper, replace the APS. 7.
PAGE 8
4. Push the new light into the power box. 5. Connect the wiring to the LED terminals on the power board. P3 - red; P4 - black. Route the wires away from the high voltage wires or contacts. 6. Replace cover. 7. Return power to Air Cleaner. Test light. If the power board fails to come on with the fan on, check that the sensor is properly set down, to the bottom of the plastic bushing, in the front of the power box.
PAGE 9
without the transformer connected. Resistance should read above 20K ohms with an analog meter and above 4M ohms with a digital meter. If the resistance readings are below these values, the power board may be the cause of the transformer failure. 8. Remove the high voltage meter. 9. Replace the power box cover. 10. Turn ON the Air Cleaner. Setting Approximate Voltage Without High Voltage Meter Before replacing the 24 V transformer, turn OFF power to the Air Cleaner at the source. 1. Remove power box cover.
PAGE 10
ohmmeter can be used. Always discharge the cell with a screw driver before testing with an ohmmeter. source wires to the Air Cleaner. Cap off the wires so the system can still be operated. 4. Remove the two nuts holding the power box to the cabinet. 5. Slide the power box forward then up to remove it from the cabinet. 6. If you are removing the power box for any length of time tape a cover over the top opening to prevent air from entering into the system. 1.
PAGE 11
Parts List Use the diagram on the preceding page to identify the part which is required. To order parts call the number listed at the bottom of the page or call your local contractor.
PAGE 12
Table 4 — TROUBLESHOOTING GUIDE PROBLEM Unit does not function correctly. Power light and performance indicator light are OFF. Unit does not function correctly. Power light is ON and performance indicator light is OFF. PROBABLE CAUSE System fan is not on. Turn system fan on. REMEDY Wiring improperly connected. Check wiring or if plug is inserted and receptacle is powered. Defective power switch. Check power switch for continuity with ohmmeter. Replace if defective. Defective safety interlock.
PAGE 13
Cleaning Record The collecting cells and prefilters must be cleaned on a regular basis for the Air Cleaner to function at its peak of efficiency. The frequency of cleaning will vary from one house to another. On average, the cells should be cleaned every 3 months. Use the chart below to keep track of your cleaning schedule.
PAGE 14
NOTES: 14
PAGE 15
ELECTRONIC AIR CLEANER LIMITED FIVE (5) YEAR WARRANTY This ELECTRO-AIR product is warranted to be free from electrical and mechanical defects in material and workmanship, under normal use and maintenance, within its listed capacity for a period of FIVE (5) years from the date of original purchase. The warranty does not include the prefilters or carbon filters. The ELECTRO-AIR product must not have been moved from the site of original installation.
PAGE 16
ATTENTION INSTALLER IMPORTANT WIRING INFORMATION This Electronic Air Cleaner is equipped with an Air Proving Switch (APS). The recommended source for the input voltage to the Air Cleaner is from the same source that is supplying the heating/cooling equipment, providing it is the same voltage as the Air Cleaner. The Air Cleaner should be wired directly to the power source. The APS will power the Air Cleaner when there is sufficient airflow to activate the sensor.