User Manual

- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and return the enclosed
warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product
that fails to operate due to defects in materials or workmanship for a period of one year from date of
purchase. This applies only to original purchasers who have bought their product from an authorized Electro-
Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original
warranty term.
If you should need to return your unit for service within the warranty period, please contact the appropriate
office listed below. Customers outside the regions listed below, please contact EHX Customer Service for
information on warranty repairs at info@ehx.com or +1-718-937-8300. USA and Canadian customers: please
obtain a Return Authorization Number (RA#) from EHX Customer Service before returning your product.
Include with your returned unit: a written description of the problem as well as your name, address,
telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
55-01 2ND STREET
LONG ISLAND CITY, NY 11101
Tel: 718-937-8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending
upon the laws of the jurisdiction within which the product was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com
FCC COMPLIANCE
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the
equipment under FCC rules.
B9
Organ Machine
Congratulations on your purchase of the Electro-Harmonix B9. The B9 transforms the
tone of a guitar and/or keyboard into that of a convincing full body electric organ.
The 9 presets were finely tuned to emulate some of the most popular and classic
electric organ tones. The B9 provides control over percussive attack level, modulation
speed, organ and dry volume. The tracking on the B9 can keep up with the quickest
musical passages.
WARNING: Your B9 comes equipped with an Electro-Harmonix 9.6DC-200BI power supply
(same as used by Boss
®
& Ibanez
®
: 9.6 Volts DC 200mA). The B9 requires 100mA at 9VDC with
a center negative plug. Using the wrong adapter or a plug with the wrong polarity may damage
your B9 and void the warranty.
GETTING STARTED
Connect the supplied power adapter to the 9V power jack. Plug your instrument into
the INPUT jack; connect your amp to the ORGAN OUTPUT jack. Set the DRY knob to
minimum and all the other top row knobs to about mid position. Select the preset
named FAT & FULL and step on the footswitch to turn on the LED. Play your
instrument and adjust controls to your liking. MOD controls modulation speed and
CLICK controls percussive click level.
DRY VOLUME KNOB
Controls the volume of the untreated instrument level at the ORGAN OUTPUT jack.
ORGAN VOLUME KNOB
Controls the overall volume of the ORGAN preset.
MOD KNOB
MOD controls the speed of modulation. Modulation can be completely turned off
when MOD is set fully counterclockwise. The type of modulation is contingent on the
preset selected. The different types of modulation available are vibrato, tremolo and
chorus. See the preset descriptions for modulation type.
CLICK KNOB
CLICK controls percussive click level. It was designed to simulate the harmonic
percussion effect on classic B3 and C3 organs. The click will be added to the very first
note or chord played. The click will retrigger only when current notes have been
released and their amplitude falls below a threshold. For a few presets, CLICK
controls parameters unique to the preset. See the preset descriptions for details.
BYPASS FOOTSWITCH

Summary of content (2 pages)