User Manual
5MM
Guitar Power Amplifier
Congratulations on your purchase of the 5MM guitar amplifier! The 5MM produces
a formidable 2.5 watts and is small enough to fit in your pocket. The 5MM’s sweet
sound and extreme portability will make it an integral part of any rig where a high-
powered amp is not required. The 5MM was designed with the guitar in mind and
can be used alone, or with your favorite overdrive or preamp driving the input to
the 5MM. The 5MM also sounds great with other instruments such as bass and
keyboard. Please read this manual to learn the correct use of the 5MM.
- CONTROLS and JACKS -
VOLUME CONTROL – This knob controls the volume or loudness of the
amplifier. As you turn the VOLUME knob clockwise, the 5MM’s output gets louder.
At a certain point in the VOLUME knob’s travel, the output will start to overdrive,
at this point you are beginning to exceed 2.5 Watts on your loudest notes. Turning
the VOLUME knob further clockwise will produce a more overdriven sound which
is the result of pure power amp saturation.
BRIGHT/NORM CONTROL – When engaged, the BRIGHT switch adds a
subtle top boost or presence to your signal. When in the NORM position, the top
boost is defeated.
INPUT Jack – Plug the output of your guitar, effects pedals or any other
instrument into the INPUT jack using a standard ¼” instrument cable. The input
impedance presented at the INPUT jack is 2 M.
8 – 16 OUTPUT Jack – Connect the 5MM’s OUTPUT jack directly to a
speaker cabinet. 8 – 16 only.
WARNING: NEVER CONNECT THE OUTPUT OF THE 5MM TO THE INPUT OF
ANOTHER AMPLIFIER, AN EFFECTS PEDAL, MIXER, COMPUTER, COMPUTER
INTERFACE OR OTHER SIMILAR DEVICE.
WARNING: THE 5MM IS A POWER AMP, NOT AN EFFECTS PEDAL. Do not
connect the output of the 5MM to the input of another amplifier, effects
pedal, mixer, computer, computer interface or other similar device. Connect
the output of the 5MM to an 8 -16 speaker cabinet ONLY.