User Manual

14
TRACKS, TRACK SELECTION, MIXDOWN, TEMPO
TRACKS OVERVIEW
 There are 6 tracks available for you to record your instruments and vocals.
 You can record a maximum of 2 tracks simultaneously.
 Each of the 6 tracks contains a volume fader and pan knob to balance your levels and place your
tracks within the stereo spectrum.
 Each track also contains an illuminated button above each track number. When a button is lit, that
particular track is active. Press the RECORD footswitch to record an overdub on the active track.
 The tracks are available in mono or stereo pairs (1 & 2, 3 & 4 or 5 & 6).
1. TRACK Faders
The Track faders independently control the
playback level of each track.
2. TRACK SELECT Buttons
The illuminated Track Select buttons (1-6)
are used to select mono or stereo pairs of
tracks for recording, overdubbing, and other
functions such as Track Erase and undo/redo.
Press a Track Select button to activate a
track. Simultaneously press a pair of Track
Select buttons (1 & 2, 3 & 4 or 5 & 6) to
enable stereo tracks. Press and hold a pair of
track buttons to toggle between mono and
stereo track selection. Press the TRACK
footswitch to advance the currently selected
track or pair of tracks. The Track Select
buttons illuminate to indicate they are
selected.
MIXDOWN Track
The MIXDOWN track is a stereo track that
records the audio from the six mono tracks
through their pan knobs and faders. Use the
Mixdown track to create a stereo mix, bounce
tracks or create special effects. The Mixdown
track is automatically set to the exact same
length as the six mono tracks. There are two
modes of Mixdown: Normal Mixdown and
Constant Tempo Mixdown.
3. TRACK PAN Knobs
The Track Pan knobs allow you to place Tracks
1-6 to the left and right outputs.
4. MIXDOWN Fader
The MIXDOWN fader controls the volume of the
Mixdown track.