User Manual

16
7. TAP Button
In addition to moving the TEMPO slider, you can
also change tempo by pressing the TAP button
two or more times to put the 95000 into Tap
Tempo mode. The 95000 produces a set tempo
by calculating the average of the four most
recent taps in a grouping of TAP button
presses. The TAP button’s integrated LED blinks
at the current tempo.
 In normal use, Tap Tempo ranges from 60
BPM to 240 BPM. The TEMPO slider can then
adjust the tempo from half the current tap
tempo, with the slider fully down, to twice
the current tempo with the slider fully up—
maxing out at a tempo of 240BPM. The
original tap tempo setting is located at the
TEMPO slider’s center position. The TEMPO
slider position is activated when it is first
moved after tapping in the tempo.
 Tempo changes entered with the TAP
button are shown on the LED display for
2 seconds.
 To view the current tempo (in BPM) on the
LED display, press the TAP button once.
 Press the PAGE and TAP buttons at the
same time to cancel Tap Tempo mode and
return tempo control to the TEMPO slider.
8. CLIX LEDs
The CLIX LEDs blink on the beat at the tempo
to which the 95000 is set. The left LED lights
briefly on every beat; the right LED only blinks
on the first beat of a bar. When the 95000 uses
its internal tempo, the TEMPO slider and/or
TAP button set the tempo at which the LEDs
blink. When EXT. CLOCK is activated, the CLIX
LEDs blink at the received MIDI Clock tempo.
 Use the CLIX LEVEL knob to adjust the
volume of the built-in CLIX metronome.