User Manual

17
LED DISPLAY AND CONTROL
1. LED DISPLAY
 The 4-digit LED display provides visual feedback
and control for a number of functions. These
functions are accessible by cycling the display
through three Primary Mode pages and four
Secondary Mode pages. Press and release the
PAGE button to cycle through these Primary
Mode pages: LOOP/DUB, BARS/BEATS, MIDI
CH/SYNC. Press and hold the PAGE button to
access the Secondary Modes.
 Each Primary Mode page is indicated by the
small round LED that lights below the display.
 The Secondary Mode pages are indicated when
the PAGE button blinks rapidly and all three
LEDs below the main display are off.
 Each Primary Mode page displays two
parameters. The left parameter is active by
default. A dot in the bottom right-hand corner
of the display indicates that the right
parameter is active. Press and release the
VALUE knob to toggle between activating the
left or right parameter.
 The LED display may also be used to display
tempo change. When you move the TEMPO
slider or tap in a new tempo with the TAP
button, the display momentarily displays the
new tempo in BPM for two seconds, and then
the LED reverts to the previously-set function.
All lit PAGE LEDs turn off during tempo display.
2. VALUE Push to Jump Knob
The VALUE knob modifies the active parameter.
Push/click the knob to toggle between the left
and right parameters. Turn the knob to change
the value of the selected parameter.
3. PAGE Button
Press and release the PAGE button to cycle the
LED display through the three Primary Pages:
LOOP/DUB, BARS/BEATS, and MIDI CH/SYNC.
Press and hold the PAGE button for one second
to access the Secondary Mode pages: CX (CLIX),
TM (TEMPO slider), CT (Count-In) and FD (Fade-
Out). Press and release the VALUE knob to
cycle through these four pages. Turn the VALUE
knob to change the setting of the displayed
parameter. Press and release the PAGE button
to exit Secondary Mode.