User Manual

ERASING SECONDARY KNOB SETTINGS

1. To erase the secondary knob settings of a particular mode, press

and hold the TAP/DIVIDE switch. Then, while holding TAP/DIVIDE,

press and hold the footswitch for 2 seconds. The LED will blink

quickly indicating that the secondary knob settings of the current

mode have been reset to the default factory settings.

2. To erase the secondary knob settings of every mode and restore

them all to factory defaults, first unplug the CANYON from power.

Press and hold the TAP/DIVIDE switch. Then, while holding

TAP/DIVIDE, plug power back in to the CANYON. The LED will blink

quickly, indicating that all secondary knob functions have been

restored to the factory default.

3. To erase the secondary knob settings of every mode and reset the

internal footswitch’s tap tempo to the factory default, first unplug

the CANYON from power. Press and hold both the TAP/DIVIDE

switch and the footswitch. Then, while holding both switches, plug

power back in to the CANYON. The LED will cycle through red,

orange and green to indicate that the CANYON has been restored to

factory default secondary knob settings and tap tempo settings.

SECONDARY KNOB FUNCTIONS BY DELAY MODE

ECHO – No secondary knob functions.

MOD – The DELAY knob controls modulation rate. Factory default is

0.15Hz, at the 8 o’clock position of the knob. This can be adjusted from

0.01Hz to 328Hz. The FEEDBACK knob controls modulation depth.

Default is at the 12 o’clock position of the knob.

MULTI – The DELAY knob controls volume decay/swell. Factory default

is at 12 o’clock, with no decay or swell. As the knob is turned up, the

first delayed echoes will become quieter. At maximum position, the

echoes will increase in volume from silence. As the knob is turned down,

the last delayed echoes will become quieter. At minimum position, the

echoes will decay to silence, which will sound identical to ECHO mode.

REVRS – The DELAY knob controls pluck sensitivity. Turn the knob up

to make the CANYON more sensitive to your pluck attack, turn it down to

reduce sensitivity. Factory default is maximum sensitivity with the knob

fully clockwise.

DMM – The CANYON can emulate the lush analog modulation of the

EHX Deluxe Memory Man. It is disabled as a factory default, but can be