User Manual

27
We have some rules for the Rhythm loop audio files imported onto the 22500:
• The audio files must be in .wav format.
• The .wav files must have 16-bit resolution and a sample rate of
44.1kHz.
• The audio files must be stereo.
• The tempo of the audio files must be no less than 60BPM and no more
than 240BPM.
• The audio files must be named TRACKM.wav.
• The TEMPO.TXT file needs to be present in the LOOPxx folder,
preferably copied from an established loop. You must edit two
parameters within TEMPO.TXT: Tempo and BpBar.
• In the second line of TEMPO.TXT, where it says TEMPO = xxx.xxxxx
bpm, insert the BPM number at which the audio file was created. The
22500 considers this tempo to be the default tempo for this particular
Rhythm loop helping it remain in sync at other tempos.
• Write the number of beats per bar in the BpBar setting. 2 gives you 2
beats per bar, 3 gives you 3 beats per bar, 4 yields 4 beats per bar and
6 gives you six 1/8th note beats per bar.
• The allowable Loop folder range is from LOOP00 to LOOP99.