User Manual

Recording / Playing / Overdubbing Loops
Press Once
RECORD
END RECORD,
START PLAYBACK
OVERDUB
END OVERDUB,
CONTINUE PLAYBACK
Press Once
Press Once
Press Once
Press Twice
STOP PLAYBACK
LOOP FSW ACTIONS
LOOP A First:
Even though the loops may be completely independent in
Freeform mode, we recommend you always record Loop A
first. When set to Loop-Lock mode, the 22500 requires Loop A
to be recorded first since Loop B’s length is automacally set
by Loop A.
START RECORDING - No Loop in Memory:
NON QUANTIZE MODE:
1. Set LOOP Mode to F nP.
2. Press LOOP A or B’s FSW once to begin recording loop
immediately. REC LED lights.
4-BEAT QUANTIZE MODES:
1. Set LOOP Mode to F 4P. Each bar is 4 beats.
2. Ensure RHYTHM buon is lit.
3. Press STOP/TAP FSW to start Rhythm loop.
4. Press LOOP A’s FSW once. Recording begins on the
following beat 1. REC LED lights.
END RECORDING / SET LOOP LENGTH:
NON QUANTIZE MODE: Press LOOP A or B’s FSW once to end
recording, set the loop length, and begin playback. PLAY LED
lights solid, MEM LED blinks.
4-BEAT QUANTIZE MODE: Press LOOP A or B’s FSW once to
enter Record-End mode. The loop will stop recording when it
reaches the end of the current bar. PLAY LED lights solid,
MEM LED blinks.
The loop immediately begins playback aer the recording
ends. Excepon: in 1-Shot mode, the loop does not play back
immediately. You must press Loop’s FSW to iniate play back.
LOOP PLAY/STOP:
PLAY: If a loop is stopped, press its FSW once to start
playback. PLAY LED lights solid.
STOP: If the loop is playing, overdubbing, or recording, press
its FSW twice to stop the loop. MEM LED blinks or is lit solid.
OVERDUB START/STOP:
OVERDUB START: While a loop is playing, press the loop’s
FSW once to enter overdub. REC, PLAY LEDs lit solid. MEM
LED blinks or is lit solid. If blinking, undo may be performed.
OVERDUB STOP: While a loop is overdubbing, press its FSW
once to end overdub; the loop connues playback. PLAY LED
lights solid, MEM LED blinks indicang undo is available.
3