User's Manual

5
OVERVIEW OF MODES
The PITCH FORK
®
+ has eight control modes that are accessed by pressing
one of the eight illuminated buttons. The mode buttons can be used to
exit, go back to previous sub-menus, or back to the main mode menu.
Selecting a different mode button resets the previously selected mode to
its main menu and brings you to the newly pressed mode.
AUX – AUX mode selects which channel is sent to the AUX output jack.
The AUX menu can also select if and how the BYPASS footswitch will affect
the AUX output.
SHIFT 1 & SHIFT 2 – The SHIFT modes select the amount that each
shift engine will transpose the input signal. Each SHIFT mode can be set
to semitones or octaves covering a total range of +/- 3 octaves . Detuning
is also possible in either SHIFT mode.
EXP – EXP mode sets how the expression pedal or control voltage signal
is routed within each of the three sub-menus: FREQ, GLIS, and VOL.
These sub-menus will allow control over pitch, glissando (glide) rate, and
volume for both SHIFT voices and DRY.
USER – USER mode programs the function of the USER footswitch. The
user programmable footswitch can be assigned to control different
parameters or augment features.
X-MOD – X-MOD mode accesses the cross-modulation amount and
SHIFT2+DETUNE2 settings. Cross modulation can be used to create ring
modulation and FM type of effects, while SHIFT2+DETUNE2 adds the
detune amount from SHIFT 2 to its selected SHIFT value.
PRESET – PRESET mode manages loading and saving presets.
LATCH – The LATCH mode controls how the BYPASS footswitch operates.
As on the original Pitch Fork
®
, the BYPASS footswitch can be set to either
latching or momentary mode.