User Manual

23
LOOPER
When the Grand Canyon is in Looper-only mode, the four white knobs
change their function to the labels in the second row of text under them.
See the CONTROLS section for details on the white knobs in Looper mode.
The two mini knobs also provide looper functions:
REVERSE: This knob acts like a switch that changes the direction of
loop playback. Turning the knob down, fully counter-clockwise,
reverses the loop’s direction. Turn the knob up above 9 o’clock and
the loop plays back in the forward direction. The looper can overdub
and play back in either direction, and the direction can be changed
during overdubbing.
SPEED: Adjusts the playback speed of the loop from half speed at its
counter-clockwise position to normal speed at noon to double-speed
at its maximum position. The speed of the loop does not change until
you turn this knob. The looper can overdub and play back at any
speed, and during overdubbing the speed can be changed.
Upon exiting Looper mode, the REVERSE and SPEED knob settings remain
fixed until you return to Looper mode and move the knobs again.