User Manual
24
USING THE LOOPER MODE
The LOOPER LED must be lit for all loop functionality.
To record or overdub your loop with delay effects, ensure both the
DELAY and LOOPER LEDs are lit. This is Delay+Looper mode.
Cycle between DELAY and LOOPER modes by pressing the small white
Mode button.
Jump directly from Looper to Delay+Looper mode by double-tapping
the Mode button. Doing so does not stop loop playback or overdub.
RECORDING A LOOP
1. Ensure no loop is in memory — The MEM LED is off.
2. Press the TAP/LOOP footswitch once. Recording begins immediately
and the REC LED lights.
3. To stop recording and set the loop length, press the TAP/LOOP
footswitch again. The MEM and PLAY LEDs will light up, and the loop
begins playing immediately. Alternatively, if you are in Looper-only
mode, you can press the BYPASS/STOP footswitch to end loop
recording and set loop length, but the loop will not play back.
4. The LOOP LVL knob controls the output level of loop playback. The
dry and delay effects levels are set by the DELAY LVL/DRY CUT knob.
5. While playing, the PLAY LED blinks each time the loop cycles.
6. Note: If the full 16 minutes of loop recording time is reached,
recording stops automatically.
STARTING LOOP PLAYBACK
1. Ensure a loop is in memory and that playback is stopped — The MEM
LED is lit and the PLAY LED is off.
2. Press and release the TAP/LOOP footswitch once to start loop
playback. The PLAY LED lights up to indicate that the loop is playing.
STOPPING LOOP PLAYBACK / LOOP FADEOUT
1. To stop loop playback, tap the TAP/LOOP footswitch two times quickly
(double-tap). Alternatively, if you are in Looper-only mode, press and
release the BYPASS/STOP footswitch once.
2. Loop playback will either stop immediately or fade out depending on
the current setting of the FADEOUT knob. Turn FADEOUT clockwise
to obtain longer fadeout times.
3. During fadeout the PLAY LED blinks rapidly until fadeout has run its
course and the loop stops.
4. If you press the TAP/LOOP footswitch once during fadeout, the
fadeout cancels and the loop continues playing at full volume.