User Manual

RESTORING FACTORY SETTINGS

To restore the Grand Canyon to factory default settings, press and hold

the DELAY TYPE knob while plugging power into the Grand Canyon.

1. Unplug the Grand Canyon from power.

2. Press and hold the DELAY TYPE knob while plugging power back in to

the Grand Canyon.

3. The PRESET LED will flash 7 times. You can release the DELAY TYPE

knob once you see this LED flashing.

4. When the knob is released, the following factory default settings will

be restored:

 All presets will be erased and restored to their factory default

settings.

 All custom Expression Mode settings will be erased and restored

to the factory default Expression Mode settings.

 The BYPASS/STOP footswitch’s tap tempo functionality will be

enabled in Delay+Looper mode.

 PITCH and DRUM delay types will be restored to their primary

modes.

 The Grand Canyon will start up in Delay+Looper mode, with the

ECHO delay type selected, and the Tap Division set to a quarter

note.

Note: Looper audio data will not be erased when restoring the Grand

Canyon to factory default settings.