User Manual

ManualsBrandsElectro Harmonix ManualsGuitar EffectsTone - ANALOG PEDAL MULTI EFFECT

TONE TATTOO

ANALOG MULTI-EFFECT PEDAL featuring

METAL MUFF, NEO CLONE & MEMORY TOY

Congratulations on your purchase of the fully analog Electro-Harmonix

TONE TATTOO, the first true multi-effect from Electro-Harmonix! The

TONE TATTOO combines three of the most popular guitar effects:

distortion, chorus and delay, into one small and convenient package.

Each section in the TONE TATTOO is taken directly from some of EHX’s

best selling effects: Metal Muff for distortion, Neo Clone for analog

chorus and analog delay from the Memory Toy.

The effects in the TONE TATTOO are completely independent from each

other. Three separate footswitches, one for each section, allow for

individual control over which effect is on or off. Each effect has its own

dedicated knobs and switches all of which are tweakable at any moment;

there are no menus to scroll through or dual function knobs.

The chain of effects in the TONE TATTOO is fixed as the following:

IN  METAL MUFF  NEO CLONE  MEMORY TOY  OUT

Using the TONE TATTOO is like having three separate effects pedals on

your pedalboard but without the need for the additional cables or

separate power supplies and all in the footprint of one medium sized

pedal. The TONE TATTOO’s footprint is 5.75” x 4.75”.

WARNING: Your Tone Tattoo comes equipped with an Electro-Harmonix

9.6DC-200BI power supply (same as used by Boss

& Ibanez

: 9.6 Volts

DC 200mA). The Tone Tattoo requires 75mA at 9VDC with a center

negative plug. The Tone Tattoo does not take batteries. Using the wrong

adapter may damage your unit and void the warranty.

Summary of content (5 pages)

PAGE 1
TONE TATTOO ANALOG MULTI-EFFECT PEDAL featuring METAL MUFF, NEO CLONE & MEMORY TOY Congratulations on your purchase of the fully analog Electro-Harmonix TONE TATTOO, the first true multi-effect from Electro-Harmonix! The TONE TATTOO combines three of the most popular guitar effects: distortion, chorus and delay, into one small and convenient package.
PAGE 2
- CONTROLS, INDICATORS & I/O METAL MUFF SECTION DRIVE Knob – Controls the amount of input gain. As the DRIVE knob is turned clockwise, the input gain of the Metal Muff increases and the sound gets more distorted: getting crunchier, thicker and increasing in saturation. BASS Knob – Is an EQ control for the bass or low frequency response of the Metal Muff. At its full clockwise position, the BASS knob provides +18.5dB of boost at a center frequency of 105Hz.
PAGE 3
NEO CLONE SECTION RATE Knob – Controls the Neo Clone’s speed of modulation. As you turn the RATE knob clockwise, the modulation speed of the chorus gets faster. The speed of modulation varies from 0.4 Hz to 9 Hz. DEPTH Button – Changes the intensity, or depth, of the chorus effect choosing between high and low depth. In the up position, the Neo Clone chorus is set to low depth, giving a subtle chorus effect. The Neo Clone LED lights up red in the lower depth position.
PAGE 4
Metal Muff LED is off, the Metal Muff section is bypassed. A red LED in the Metal Muff section indicates that the GATE function if off. A green LED in the Metal Muff section indicates that the GATE is enabled. NEO CLONE Footswitch and STATUS LED - The footswitch located in the middle of the Tone Tattoo toggles the Neo Clone effect on or off. When the LED in the Neo Clone section is lit (either red or green), the Neo Clone effect is active. When the Neo Clone’s LED is off, the Neo Clone section is bypassed.
PAGE 5
- WARRANTY INFORMATION Please register online at http://www.ehx.com/product-registration or complete and return the enclosed warranty card within 10 days of purchase. ElectroHarmonix will repair or replace, at its discretion, a product that fails to operate due to defects in materials or workmanship for a period of one year from date of purchase. This applies only to original purchasers who have bought their product from an authorized Electro-Harmonix retailer.