User Manual

16
TECHNICAL SPECIFICATIONS
Mic Pre-Amp Gain:
LO Mode = 15db; HI Mode = 25dB (XLR out into High Z load)
LO Mode = 4.5dB; HI Mode = 15dB (XLR out into 600  load)
A/D and D/A Conversion Sample Rate = 36 kHz
A/D and D/A Conversion Bit Resolution = 24 bits
- WARRANTY INFORMATION -
Please complete and return the enclosed warranty card within 10 days of purchase. We will repair the
unit at no charge within one year of date of purchase . If you should need to return your unit for
service within the warranty period, please include a brief description of the problem as well as your
name, address, telephone number, copy of your receipt, and a check or money order for shipping and
handling:
United States - $12
Canada - $15
Europe and outside countries - $25
Ship to:
Electro-Harmonix
C/O New Sensor Corporation
55-01 2
nd
St.
Long Island City, NY 11101
Attn: Service Department
Please make checks/money orders payable to New Sensor Corporation .
To hear demos by rock stars on all EH pedals visit us on the web at www.ehx.com . Email us at
[e-mail]
– FCC COMPLIANCE –
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the
equipment under FCC rules.