Specifications

Non-Illuminated E-Stop Con-
tact
Hookup Illuminated E-Stop Con-
tact
Hookup
SSA-EB1P-04
SSA-EB1MP-04
4 N.C.
22
11 12
21
41
42
32 31
SSA-EB1PL1-04
SSA-EB1ML1P-04
4 N.C.
22
11 12
21
41
42
X23132X1
LED24V
SSA-EB1P-11
SSA-EB1MP-11
1 N.C. / 1 N.O.
11 12
24 23
SSA-EB1PL1-11
SSA-EB1ML1P-11
1 N.C. / 1 N.O.
11 12
X22324X1
LED24V
SSA-EB1P-13
SSA-EB1MP-13
3 N.C. / 1 N.O.
22
11 12
21
41
42
34 33
SSA-EB1PL1-13
SSA-EB1ML1P-13
3 N.C. / 1 N.O.
22
11 12
21
41
42
X23334X1
LED24V
SSA-EB1P-22
SSA-EB1MP-22
2 N.C. / 2 N.O.
22
13 14
21
41
42
34 33
SSA-EB1PL1-22
SSA-EB1ML1P-22
2 N.C. / 2 N.O.
22
13 14
21
41
42
X23334X1
LED24V
SSA-EB1PL2-12
SSA-EB1ML2P-12
(Push ON LED)
2 N.C. / 1 N.O.
22
13 14
21
31
32
X2X1
LED24V
Applicable Crimping Terminal
ø3.2 min.
ø6.0 max.
4.7 min. 3.0 max.
6.0 max. 3.2 max.
4.7 to 5.9
Insulation Tube
Crimping
Terminal
Ring Terminal Spade Terminal Solid Wire
Wire
4.7 to 5.9
4.7 to 5.9
6.2 max.
Insulation Tube
Crimping
Terminal
Wire
ø1.2 max.
Banner recommends the use of crimp terminals with stranded wire or solid core wire to prevent short circuits between terminals. Ensure
that the insulation tube is installed on crimp terminals.
Installing and Removing the Terminal Cover
Install the SSA-EB1-TC Terminal Cover
1. Align the TOP mark on the SSA-EB1-TC terminal cover with the TOP mark on the contact block.
2. Place the two projections on the bottom of the contact block into the slots in the SSA-EB1-TC terminal cover.
SSA-EB Series Emergency Stop Push Buttons
P/N 168349_web
Rev. B
www.bannerengineering.com - tel: [phone]