Datasheet

Table 1: Hookup
QD Pin Terminal
Strip
Color Function Connection and Pinout
1 1 White AUX NO Output (Switched
pin 2)
5 83 1 6 4 2 7
EZ-LIGHT
8-pin M12 Euro Male
C B A 0V
E-Stop Button Contacts
(armed)
2
8
3
4
1
7
6
5
Male
8 - Red
7 - Blue
6 - Pink
5 - Gray
4 - Yellow
3 - Green
2 - Brown
1 - White
2 2 Brown +24V dc (12 to 30V dc)
3 3 Green Stop Signal input from
safety module or machine
+24V dc (12 to 30V dc)
4 4 Yellow CH2a
5 5 Gray CH2b
6 6 Pink CH1a
7 7 Blue 0V dc
8 8 Red CH1b
Table 2: SSA-EB1xxLYR-xx or SSA-EB1xxLGR-xx
See Figure 1 on page 5.
Situation
Indication Illumination Logic
Button Armed
Pin 3 open
YELLOW / SOLID
or GREEN /
SOLID
• Indicates button is armed
• If used, ES-FA-11AA Module status is in a RESET/RUN condition
(31/32 open)
Button Pushed
Pin 3 open or +Vdc
RED / FLASH • Indicates the button is pushed (actuated)
• Signal on Pin 3 has no effect on a button that has been pushed
(actuated)
Button Armed
Pin 3 = +Vdc
RED / SOLID • Indicates the machine is in an Emergency Stop or other stop condition,
but that specific button has not been pushed (actuated)
• This optional signal (12 to 30Vdc) allows the user to indicate a stop
condition by turning the armed indication to RED (steady) indication
Table 3: SSA-EB1(2)xxLXR-xx
See Figure 1 on page 5.
Situation
Indication Illumination Logic
Button Armed
Pin 3 open
OFF • Indicates button is armed
• If used, ES-FA-11AA Module status is in a RESET/RUN condition
(31/32 open)
SSA-EB Series Emergency Stop Push Buttons
4 www.bannerengineering.com - Tel: [phone] P/N 165998 Rev. E