Make Up Air II Installation Manual

05/21/2019 20 EI914

Multi-Speed Setup

If your application includes a multi-speed blower, follow the setup steps in this section.

Step 1

Enter into “MULTI-SPD SETUP” mode:

Press and hold “SELECT” and “NEXT” for 5 seconds

FAN OFF

Step 2

Select “NEXT” to begin “MULTI-SPD SETUP”

(select HOME to return)

MULTI-SPD NEXT 

HOME

Step 3

Turn on vent hood to its highest setting, then press “NEXT”

SET EXT BL – HI

PRESS NEXT

NOTE: If display reads:

ERROR: 1 = 0.0A

PRESS NEXT

Check CT doughnut wiring to verify it is correct, then press “NEXT”

Step 4

If vent hood has a medium speed select Y, if not select N

MED SPD Y 