Spec Sheet

07/15/2010 EL907
STANDARD EQUIPMENT
▪ 240V, single phase, external fusing required
▪ Quiet DC power relays
▪ Thermostat end switch connection point
▪ Hi-limits, automatic reset - 150° F/180° fused link
▪ Compact enclosure
▪ Two element sizes available - 8 x 10 or 8 x 16
▪ 5-year element warranty
▪ 2-year parts warranty
TEMPERATURE RISE CHART*
Temperature Rise Needed 80° F 70° F 60° F 50° F 40° F 30° F
Model Watts CFM CFM CFM CFM CFM CFM
EM-WC0515H 4800 198 216 252 302 378 504
EM-WC1025H 9600 378 432 504 604 756 1007
EM-WC0515L 4800 189 216 252 302 378 504
EM-WC1025L 9600 378 432 504 604 756 1007
*Typically the maximum temperature rise for this product is 40° F for room air inlet. If used for make-up air, larger temperature rises are permissible, see table above.
ELECTRIC SUPPLY
Model kW Btu/h Amps Fuse Phase Voltage
Source
CB
Shipping
Weight
Installation
Manual
Minimum
CFM
EM-WC0515H 4800 16,383 20 N/A 1-60 240 30 7 HI309 180
EM-WC1025H 9600 32,765 40 N/A 1-60 240 50 7 HI309 370
EM-WC0515L 4800 16,383 20 N/A 1-60 240 30 14 HI309 180
EM-WC1025L 9600 32,765 40 N/A 1-60 240 50 14 HI309 370
CHIP CODE OPTIONS
†
Switch
Position
BCDEH
0 96° 20° 40° 60° 88°
1 100° 25° 52° 65° 90°
2 104° 30° 64° 70° 92°
3 108° 35° 76° 75° 94°
4 112° 40° 88° 80° 96°
5 116° 45° 100° 85° 98°
6 120° 50° 112° 90° 100°
7 124° 55° 124° 95° 102°
†
Comfort level temperature setting - choose correct chip code for application. Note: Unless otherwise specifi ed, product will be shipped with a default “D” chip.
Specification Sheet - Electric Make-Up Air/Boost Heater
Specifi cations subject to change without notice,
all rights reserved.
▪ Temperature sensing with full modulation
▪ Maintains specifi c temperature set point
▪ Unique design allows for simplifi ed installation
▪ Cooling mode element disable option
▪ Requires 24V external control power supply
▪ ARL listed
▪ Made in the USA
Monticello, Minnesota
800.922.4138
www.electromn.com