Owner's Manual
Table of Contents Table of Contents . . . . . . . . . . . . . . . . . ii Step 3: Wire the Speaker . . . . . . . . . 8 Product Description . . . . . . . . . . . . . . . 1 Step 4: Mount the Speaker to the Bracket . . . . . . . . . . . . . . . . 9 Welcome . . . . . . . . . . . . . . . . . . . . . . . . 1 Important Features. . . . . . . . . . . . . . . . 1 Model Summary . . . . . . . . . . . . . . . . . . 2 Packing List (3.2, 4.2, 6.2) . . . . . . . . . . 2 EVID™ Product Family . . . . . . . . . . . .
Product Description Welcome Important Features Thank you for purchasing EVID™ Series loudspeakers. Read through this manual to familiarize yourself with the features, applications, and precautions before you use these products. EVID™ Series loudspeakers use innovative design and materials to provide premium-level performance from compact surface-mount speakers. Four models comprise the EVID™ Series: the 6.2 with dual 6-inch LF drivers and a 1inch titanium tweeter with waveguide; the 4.
Product Description Model Summary Packing List (3.2, 4.2, 6.2) EVID™ 3.2 Listed and illustrated below are the parts included in each boxed pair of EVID™ speakers. Most compact of the EVID™ Series, the EVID™ 3.2 uses dual 3.5-inch LF drivers with a .75-inch titanium direct radiator tweeter to provide high-fidelity, full-range sound over an extremely wide coverage area. The EVID™ 3.2t includes a transformer for 70V or 100V systems. EVID™ 4.2 The compact EVID™ 4.
Product Description EVID™ Product Family Product Feature Identification 8-Ohm Impedance Illustrated below are the major components of the EVID™ Series full-range speakers. Part Number Model Description 301045-001 3.2 Dual 3.5" full range shielded (black) 301045-002 3.2w Dual 3.5" full range shielded (white) 301046-001 4.2 Dual 4" full range shielded (black) 301046-002 4.2w Dual 4" full range shielded (white) 301047-001 6.2 Dual 6" full range shielded (black) 301047-002 6.2w A.
Product Description SAM™ (Strong-Arm-Mount™) System EVID™’s SAM™ system (Strong-ArmMount™) excels at meeting the four requirements for mounting FGM/BGM systems: simple, quick, versatile, and reliable. Three easy steps and you are done: Attach the surface bracket to the wall or ceiling; attach the EVID™ enclosure to the bracket with the socket-head bolt; aim the enclosure and tighten the bolt. SAM™ allows greater flexibility for aiming than ball-type mounts that limit range of motion when not on center.
Product Description Step 2: Select Voltage Tap (Models 4.2t and 6.2t Only) Step 3: Mount the Speaker to the SAM™ Bracket Before mounting the speaker to the bracket, select the proper voltage tap setting for your installation. The voltage selector switch is located at the rear of the speaker below the input terminal panel. The EVID™ 4.2t and 6.2t include a switch for selecting the power taps. The EVID™ 3.2t has a single power tap.
Product Description Attach both logo caps as shown in Figure 11 after tightening and securing the speaker. EV logo cap (small) EV logo cap (large) Connect seismic security cable Figure 12: Secure seismic security cable Step 6: Test System Operation Figure 11: Attach logo caps Step 4: Wire the Speaker Connect the wires to the speaker at the back terminal plate observing the polarity of the connections. The push-terminals accept banana connector plugs.
Product Description Packing List (12.1 Subwoofer) Product Feature Identification Below is the list of parts included with the EVID™ 12.1 subwoofer. The parts are illustrated in Figure 14. The 12.1 subwoofer comes with a dual-mode mounting bracket that enables the unit to be easily mounted at either a wall/wall (corner) or on a wall/ceiling (midwall) junction. The included forged steel eyebolt provides the installer a solid attachment point for a safety line. The 12.
Product Description Step-by-Step Installation and Wiring (12.1 Subwoofer) Step 1: Mount the Bracket The mounting bracket can be installed two ways (see Figures 17 and 18), allowing optimal configurations for installations. Leave 1.5" of space between the bracket and the ceiling when installing in a corner! Attach the bracket to the wall with suitable fasteners screwed into structural members in the wall. Remember: It is the installer's responsibility to insure that the structure can safely support the load.
Product Description from amplifier enclosure hangs from the top clip, always install the lower one to secure against possible disengagement of the top clip. Straighten the EV® logo and press firmly at its center to seat it securely into its mounting hole.
Product Description 1 Rungs 2 3 cross-tees. This stabilizes the enclosure from rocking. Trim the ceiling panel to fit the new opening(s) and drop into place. It is the installer's responsibility to assure that the chosen rigging points are strong enough to support the load. Warning: Never try to install this speaker in a suspended ceiling without proper rigging support! Floor Mounting The EVID™ 12.
Uniform Limited Warranty Electro-Voice® products are guaranteed against malfunction due to defects in materials or workmanship for a specified period, as noted in the individual product-line statement(s) below, or in the individual product data sheet or owner's manual, beginning with the date of original purchase. If such malfunction occurs during the specified period, the product will be repaired or replaced (at our discretion) without charge. The product will be returned to the customer prepaid.
Appendix A: Integrating the Subwoofer Installation Examples The EVID™ Series is a product family with the flexibility to fit the requirements of many different applications. Listed below are some suggested combinations for systems using the 12.1. • Rich, full-sounding low-level background music and paging in a quiet restaurant, office, or retail space: two EVID™ 3.2s in parallel on each output of a 12.1. • Moderate-level music and paging in a sports bar/restaurant or upbeat retail space: two EVID™ 4.
Appendix B: Painting the EVID™ Speakers The 12.1 subwoofer is a painted wood enclosure which can easily be repainted. Painting Process (3.2, 4.2, 6.2) The EVID™ 3.2, 4.2 and 6.2 are made of high-impact ABS, which accepts a wide variety of paints. • Remove the grille and mask the baffle. • Clean the cabinet and grille by rubbing the speaker with a lightly dampened cloth. Do not, however, use abrasives such as sandpaper or steel wool.
Appendix C: Troubleshooting Table Problem 1. No sound Possible Cause(s) Action Amplifier Connect a known working test speaker to the amplifier outputs. If there is no sound, check that all the electronics are on, the signal routing is correct, the source is active, the volume is turned up, and so on. Correct/ repair/replace as necessary. If there is sound, the problem is in the wiring. Wiring Verify that you have connected the correct wire pairs to the amplifier.
U.S.A. and Canada only. For customer orders, contact the Customer Service department at 800/392-3497 Fax: 800/955-6831 For warranty repair or service information, contact the Service Repair department at 800/685-2606 For technical assistance, contact Technical Support at 866/78 AUDIO Please refer to the Engineering Data Sheet for warranty information. Specifications subject to change without notice.