User Guide

ManualsBrandsElectro-Voice ManualsOtherAB-32AB-62

AB-32 / AB-62 Array Bracket System

Assembly and Installation Instructions

Ceiling Suspension (All Sizes)

Step 1: Assemble 180 Adapter Plate

Assemble the Vertical Array Adapter (Item 2, Fig. 1) to the Array Bracket (Item 1) using 4 Screws (Item 3), 4 Flat

Washers (Item 4), and 4 Lock Nuts (Item 5) as shown in Figure 1.

(Item 1)

Array Bracket

Figure 1

Evid 6.2/4.2/3.2 Bracket Assembly for

Threaded Rod Installation

180 Array Bracket Kit

AB-32 and AB-62 series kits feature a 2 sided powder

coated steel mounting assembly that allows the mount-

ing of 2 EVID speakers into a 180° pattern array con-

figuration. The AB-32 works with the EVID 3.2 series

and can be used with a threaded rod for suspension

from the ceiling. The AB-62 allows the EVID 4.2 or 6.2

series speakers to be used with a speaker stand tripod

or hung from the ceiling utilizing a threaded rod as shown.

The EVID’s position can then be adjusted using the

Strong Arm Mount™ to cover a variety of patterns to

best serve the installation requirements.

All assembly hardware is included in packaging.

sedulcnItiKtekcarByarrA°0812.3divE

metI.ytQnoitpircseD

11 2.3divE,tekcarByarrA

21 2.3divE,retpadAyarrAlacitreV

321"5.x02-4/1,wercS

421).aiDedisnI"4/1(,rehsaWtalF

52102-"4/1,tuNkcoL

(Item 2)

Vertical

ArrayAdapter

(Item 3)

Screws

(Item 4)

Flat

Washers

(Item 5)

Lock Nuts

sedulcnItiKtekcarByarrA°0812.4/2.6divE

metI.ytQnoitpircseD

11 2.4/2.6divE,tekcarByarrA

21 2.4/2.6divE,retpadAyarrAlacitreV

321"5.x02-4/1,wercS

461).aiDedisnI"4/1(,rehsaWtalF

56102-"4/1,tuNkcoL

64 "5.x02-4/1,wercSdaeHtalF

710812.4/2.6divE,retpadAyarrA°

81 tnuoMeloP

Summary of content (4 pages)

PAGE 1
AB-32 / AB-62 Array Bracket System Assembly and Installation Instructions 180° Array Bracket Kit AB-32 and AB-62 series kits feature a 2 sided powder coated steel mounting assembly that allows the mounting of 2 EVID speakers into a 180° pattern array configuration. The AB-32 works with the EVID 3.2 series and can be used with a threaded rod for suspension from the ceiling. The AB-62 allows the EVID 4.2 or 6.
PAGE 2
Ceiling Suspension (Continued) Step 2: Assemble SAM’s to Array Bracket Attatch the Strong Arm Mounts to the Array Bracket (Item 1) using 4 Screws (Item 3), 4 Flat Washers (Item 4), and 4 Lock Nuts (Item 5) per SAM as shown in Figure 2. (Item 3) Screws (Item 4) Flat Washers (Item 5) Lock Nuts (Item 1) Array Bracket Strong-Arm Mount (SAM) Figure 2 Evid 6.2/4.
PAGE 3
Tripod Mounting (6.2/4.2 only) Step 1: Assemble Array Bracket and 180° Array Adapter (Item 3) Screws (Item 4) Flat Washers Assemble 180° Array Adapter (Item 7) to the Array Bracket (Item 1) using 4 Screws (Item 3), 4 Flat Washers (Item 4) and 4 Lock Nuts (Item 5) as shown in Figure 4.
PAGE 4
Suspension Safety Warning This guide provides instruction on how to use EVID components to create example arrays. Correct use of this hardware is required for secure array construction. Only persons with the knowledge of proper hardware and safe suspension techniques should attempt to suspend any sound systems overhead. CAUTION! The weakest component determines the size and safety of the entire array.