Powered Loudspeaker Owner’s Manual ELX112P ELX115P ELX118P
Important Safety Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. AVIS: RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR. WARNING: CONNECT ONLY TO MAINS SOCKET WITH PROTECTIVE EARTHING CONNECTION.
Precautions • If Live X loudspeakers are used outdoors on a sunny day, place the loudspeakers in a shaded or covered area. The loudspeaker amplifiers have protection circuits that temporarily shut the loudspeaker off when extremely high temperatures are reached. This can happen on hot days when the loudspeaker is in direct sunlight. • Do not use Live X loudspeakers in an environment where temperatures exceed +40°C (104°F). • Never expose a Live X loudspeaker to rain, water, or high moisture.
Description Thank you for choosing an Electro-Voice Live X powered loudspeaker system. Please take time to consult this manual to understand all the features built into your Electro-Voice system and fully utilize its performance capabilities. Clear, powerful and musical Electro-Voice loudspeakers command the stage at high-profile venues and major events worldwide. Born stage-ready, the Live X series includes powered and passive models that all feature EV-engineered components in solid wood cabinets.
System Features ELX112P – 12” Two-Way Powered Loudspeaker The ELX112P is a compact, powerful and versatile choice for sound reinforcement and stage monitoring applications — lightweight and durable, with a 1000 W amp. • • • • • • • • • • • • • • • • • DH-1K 39mm (1.
System Features (cont’) ELX118P – 18” Powered Subwoofer Optimized for performance with the ELX112P and ELX115P, the ELX118P adds a deep, low-frequency, amplified punch that you can hear and feel.
Tripod and Floor Monitor Operation Floor Monitor Electro-Voice ELX112P and ELX115P loudspeakers may be used as a floor monitor by placing the speaker on the integral monitor angle. Make sure to: • Place the speaker on a level, stable surface that is solid and secure. • Route cables so that performers, production crew and audience members will not trip over the cables. Secure cables with wire ties or tape whenever possible.
Tripod and Floor Monitor Operation (cont’) Tripod Electro-Voice ELX112P and ELX115P loudspeakers include 35mm (1-3/8”) stand mounts to allow mounting on tripod stands or above an ELX118P. Make sure to: • Check the specifications of the speaker stand to be certain it is capable of supporting the weight of the speaker. • Check that the speaker stand is placed on a flat, stable surface and be sure to fully extend the legs of the stand.
Amplifier Controls The Live X amplifier has a combination of controls and connectors to ensure the most versatile loudspeaker system. Each component below has a description on the following pages.
Amplifier Controls (cont’) MAINS IN AC connection is established via an IEC-connector. For 120V operation, the AC voltage must be 95V - 132V. For 230V operation, the AC voltage must be 190V - 264V. A 3m (10’) AC cord with fitting IEC-plug is supplied. Extension cords can be used to lengthen the AC cable as necessary. Make certain they are 3-conductor cables of suitable gauge and they are properly grounded to avoid electrical hazards and extraneous noise.
Amplifier Controls (cont’) FULL RANGE / WITH SUB When switched to WITH SUB, activates a 100 Hz highpass for use with a subwoofer. Always select WITH SUB when using the ELX112P/ELX115P with a subwoofer for proper acoustic summation. FULL RANGE EQ The FULL RANGE EQ switch controls the tone of the loudspeaker. EQ FLAT (–) works best when the loudspeaker is used for vocal monitors or for speech. EQ MID-CUT ( ) works best for music playback and applications that require enhanced bass and treble.
Recommended Configurations Daisy-Chaining Full-Range Systems (Dual ELX112P’s or ELX115P’s) Vocal Microphone MP3 Player 12 Electro-Voice Live X Series Powered Owner’s Manual
Recommended Configurations (cont’) Using Full-Range Systems as Monitors (Dual ELX112P’s or ELX115P’s) Vocal Microphone Instrument Electro-Voice Live X Series Powered Owner’s Manual 13
Recommended Configurations (cont’) Stacking Full-Range Systems w/Subwoofers (Dual ELX112P’s or ELX115P’s, Dual ELX118P’s) Mixer 14 Electro-Voice Live X Series Powered Owner’s Manual
Specifications ELX112P Model ELX115P (120V - F01U170821) (230V - F01U170818) (120V - F01U170822) (230V - F01U170819) Freq. Response (-3 dB): 60 Hz - 18 kHz1 56 Hz - 18 kHz1 42 Hz - 100 Hz2 Freq. Range (-10 dB): 50 Hz - 20 kHz1 44 Hz - 20 kHz1 32 Hz - 130 Hz2 Max. Measured SPL3: 132 dB 134 dB 134 dB Coverage (Horiz. x Vert.): Power Rating: LF Transducer: HF Transducer: Connectors: 700W (1) EVS-15K, 381mm (15”) Woofer (1) EVS-18K, 457mm (18”) Woofer N/A 1.
Dimensions ELX112P Bottom View Front View Right View Rear View Front View Right View Rear View Front View Right View Rear View ELX115P Bottom View ELX118P Top View 16 Electro-Voice Live X Series Powered Owner’s Manual
Frequency Response Graphs ELX115P 110 110 100 100 Sensitivity (dB) Sensitivity (dB) ELX112P 90 80 70 90 80 Frequency Response, Full Space, With Sub Mode Frequency Response, Full Space, Full Range Mode 20 50 100 1000 10000 20000 70 Frequency Response, Full Space, With Sub Mode Frequency Response, Full Space, Full Range Mode 20 50 100 1000 Frequency (Hz) 10000 20000 Frequency (Hz) ELX118P 110 Sensitivity (dB) 100 90 80 70 Frequency Response, Half Space 20 50 100 1000 1000
Troubleshooting Problem Possible Cause(s) Action 1. No Sound Amplifier Connect a known working test speaker to the amplifier outputs. If there is no sound, check that all the electronics are on, the signal routing is correct, the source is active, the volume is turned up, and so on. Correct/repair/replace as necessary. If there is sound, the problem is in the wiring. Wiring Verify that you have connected the correct wire pairs to the amplifier.
Notes Electro-Voice Live X Series Powered Owner’s Manual 19
Electro-Voice 12000 Portland Avenue South, Burnsville, MN 55337 Phone: 952/884-4051, Fax: 952/884-0043 www.electrovoice.com © Bosch Communications Systems Part Number LIT000505 Rev 5 06/2011 U.S.A. and Canada only. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: + 49 9421-706 0 Fax: + 49 9421-706 265 Other Internatonal locations.
