ELX200 Powered Loudspeakers en | Installation manual
en 3 Table of contents 1 Safety 4 1.1 Important safety instructions 4 1.2 Suspension 5 1.3 FCC information 6 1.4 Precautions 6 1.5 Notices 7 2 Description 8 2.1 Short information 8 2.2 System features 9 2.3 Quick setup 11 3 Tripod and floor monitor operation 13 3.1 Tripod or pole mount 13 3.2 Floor monitor 15 4 Suspension 16 5 Amplifier DSP 19 5.1 Amplifier DSP controls 19 5.2 System status 21 5.3 DSP controls 22 5.3.
ELX200 Powered Loudspeakers 1 Safety 1.1 Important safety instructions The lightening flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the WARNING: TO REDUCE THE RISK OF presence of uninsulated “dangerous FIRE OR ELECTRIC SHOCK, DO NOT voltage” within the product’s enclosure OVEREXPOSE THIS APPLIANCE TO RAIN that may be sufficient magnitude to OR MOISTURE constitute a risk of electric shock to AVIS: RISQUE DE CHOC ELECTRIQUE, persons. NE PAS OUVRIR.
en 5 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. No naked flame sources, such as lighted candles, should be placed on the apparatus. 16.
ELX200 Powered Loudspeakers 1.3 FCC information IMPORTANT: Do not modify this unit! Changes or modifications not expressly approved by the manufacturer could void the user’s authority, granted by the FCC, to operate the equipment. Notice! This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
en 1.5 7 Notices Old electrical and electronic appliances Electrical or electronic devices that are no longer serviceable must be collected separately and sent for environmentally compatible recycling (in accordance with the European Waste Electrical and Electronic Equipment Directive). To dispose of old electrical or electronic devices, you should use the return and collection systems put in place in the country concerned. Copyright and disclaimer All rights reserved.
ELX200 Powered Loudspeakers 2 Description Thank you for choosing an Electro-Voice powered loudspeaker system. Please take time to consult the manual to understand all the features built into your EV system and fully utilize its performance capabilities. ROCK SOLID SOUND: Electro-Voice ELX200 portable loudspeakers The ELX200 series is the newest member of the best-selling Electro-Voice portable loudspeaker family.
en 2.
ELX200 Powered Loudspeakers ▪ EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading. ▪ Professional-grade hardware: three M10 threaded mounting points for forged eyebolts, integrated pole-mounts and the proven ZLX three-handle design for easy lifting.
en 2.3 11 Quick setup Full-Range loudspeaker Models: ELX200-10P, ELX200-12P, and ELX200-15P To set up a full-range loudspeaker, do the following: Step 1. Illustration Connect the AC power cord from a MAINS IN grounded line receptacle to the MAINS IN. Connect the XLR, TRS, or RCA cable QuickSmartDSP | MONITOR from an audio source to INPUT 1 or INPUT 2. PUSH FOR DSP MASTER VOL 2. AUX IN INPUT 1 L R OUTPUT INPUT 2 Adjust the input gain to (infinity). 4. Switch POWER to ON. 5.
ELX200 Powered Loudspeakers Subwoofer Models: ELX200-12SP and ELX200-18SP To set up a subwoofer, do the following: Step 1. Illustration Connect the AC power cord from a MAINS IN grounded line receptacle to the MAINS IN. Connect the XLR or TRS cable from an QuickSmartDSP | MONITOR audio source to INPUT 1 or INPUT 2. 4. Adjust the MASTER VOL knob to the PUSH FOR DSP MASTER VOL desired volume. 2017.06 | 01 | F.01U.326.891 INPUT 2 OUTPUT 2 Switch POWER to ON. INPUT 1 OUTPUT 1 3.
en 3 Tripod and floor monitor operation 3.1 Tripod or pole mount 13 ELX200-10P, ELX200-12P, and ELX200-15P loudspeakers mount on a tripod stand or on a pole above a subwoofer. Mounting a loudspeaker on a tripod stand Figure 3.1: Full-Range models on a tripod stand Caution! ! Tripod is not evaluated for safety with this loudspeaker. Check the specifications of the tripod stand to be certain it is capable of supporting the weight of the loudspeaker.
ELX200 Powered Loudspeakers Mounting a loudspeaker on a pole Caution! ! Two person lift and placement is recommended for the heavier loudspeakers. Single person lift and placement of heavier loudspeakers could cause injury. To mount a loudspeaker on a pole, do the following: 1. Place the subwoofer on a level and stable surface. 2. Insert the M20 threaded pole into the combo pole cup on the top of the subwoofer. 3. Turn the M20 threaded pole clockwise to secure the pole to the subwoofer. 4.
en 3.2 15 Floor monitor ELX200-10P, ELX200-12P, and ELX200-15P loudspeakers may be used as a floor monitor by placing the loudspeaker on the integral monitor angle. To set up a loudspeaker as a floor monitor, do the following: 1. Place the loudspeaker on a level and stable surface. 2. Safely route cables to prevent injury to performers, production crew, and audience members. Notice! Secure cables with wire ties or tape whenever possible.
ELX200 Powered Loudspeakers 4 Suspension The ELX200 enclosures have three M10 threaded points; two points on top of the enclosure and one point on the bottom. Forged shoulder eyebolts rated for overhead suspension may be used to suspend an individual loudspeaker, such as the EBK1-M10-3PACK accessory. Warning! Suspending any object is potentially dangerous and should only be attempted by individuals who have a thorough knowledge of the techniques and regulations of suspending objects overhead.
en 17 Installing the eyebolts To install the eyebolts, do the following: 1. Remove the three fly point covers from the suspension points. 2. Install M10 eyebolts and fender washers into the suspension points. Warning! ! Eyebolts must be fully seated and oriented in the plane of pull. Always use fender washers at least 1.5 inch in diameter and 1/16 inch thick under the eyebolt to distribute the load on the enclosure. A B Figure 4.
ELX200 Powered Loudspeakers Figure 4.3: Eyebolts shown orientated in the plane of pull (left correct, right incorrect) Warning! ! Never exceed the limitations or maximum recommended working load for Electro-Voice loudspeakers. Disregarding this warning could result in serious injury or death. 5° MAX 5° MAX 5° MAX 5° MAX 10° 90° 90° Figure 4.4: Maximum working load - vertical orientation 50 lb per suspension point Warning! ! Never suspend ELX200 Series loudspeakers in a vertical column array.
en 5 Amplifier DSP 5.1 Amplifier DSP controls 19 The amplifier has a combination of controls and connectors to ensure the most versatile loudspeaker system. Full-Range loudspeaker control and monitoring interface The full-range loudspeaker DSP control menu selections are available for the ELX200-10P, ELX200-12P, and ELX200-15P.
ELX200 Powered Loudspeakers 8. AUX INPUT – Stereo unbalanced RCA inputs for connecting external audio media devices, such as MP3 players. Both RCA inputs are summed and can be controlled with INPUT 1 level. The inputs can be used simultaneously with XLR/TRS INPUT 1. Subwoofer control and monitoring interface The subwoofer DSP control menu selections are available for the ELX200-12SP and ELX200-18SP.
en 5.2 21 System status Normal Figure 5.3: Normal system status home screen with Bluetooth® status 1. LEVEL – Indicates the master gain of the system in dB. The range is from mute to +10 dB, in 1 dB increments. 2. IN1 – VU meter displays the signal level of INPUT 1 into the amplifier INPUT 1 XLR connector. IN1 and IN2 are independent of each other. 3. IN2 – VU meter displays the signal level of INPUT 2 into the amplifier INPUT 2 XLR connector. IN1 and IN2 are independent of each other. 4.
ELX200 Powered Loudspeakers LIMIT protects the loudspeaker from short-term peaks which can cause distortion. When LIMIT is shown small on the screen, the limiter is active but keeps distortion under control. The large LIMIT indicates the sound is negatively affected. Reducing the output volume (MASTER VOL) is strongly recommended when the large limit indication is shown. 5.3 DSP controls An integrated DSP control menu allows the user to select multiple DSP system settings on the loudspeaker.
en 23 120Hz 150Hz ELX200-12SP ELX200-18SP ZXA1-SUB EKX-15SP EKX-18SP ELX118P TREBLE 0 db (Default) -12 dB to +6 dB MID 0 db (Default) -12 dB to +6 dB BASS 0 db (Default) -12 dB to +6 dB LED ON (Default) OFF LIMIT DISPLAY BACK LCD DIM ON (Default) OFF BRIGHT 5 (Default) 1 - 10 CONTRAST 5 (Default) 1 - 10 BACK STORE EXIT, 1, 2, 3, 4, 5, EXIT RECALL EXIT, 1, 2, 3, 4, 5, EXIT LOCK NO (Default) YES CONTROL APP ON OFF (Default) RESET RESET ARE YOU SURE? NO (Default) YES Electro-Voice I
ELX200 Powered Loudspeakers INFO [PRODUCT NAME] [FIRMWARE VERSION] ©2017 Electro-Voice EXIT Table 5.1: Full-Range Loudspeaker DSP Control Menu EXIT Menu The Exit menu is used to return to the home screen. Notice! The display returns to the home screen after two minutes of inactivity. MODE Menu The Mode menu is used to configure the type of sound the loudspeaker delivers. Available options for this selection are: MUSIC, LIVE, SPEECH and CLUB.
en 25 TREBLE Menu The Treble menu is used to adjust the high frequency performance of the loudspeaker for different applications or personal preference. The parameter controls a high shelving filter that is centered on 6 kHz. The default is zero (0). MID Menu The MID menu is used to adjust the midrange frequency performance of the loudspeaker for different applications or personal preference. The parameter controls a parametric EQ that is centered on 1.8 kHz. The default is zero (0).
ELX200 Powered Loudspeakers 2. Push the MASTER VOL knob to select STORE. The store screen appears. 3. Push the MASTER VOL knob to select 1. The Enter name for 1 screen appears. 4. Use the MASTER VOL knob to scroll through the characters. The characters appear. 5. Push the MASTER VOL knob to select the desired character. 6. Turn the MASTER VOL knob to move to the next character entry. Continue selecting characters until the desired name is entered. 7. Use the MASTER VOL knob to scroll to SAVE. 8.
en 27 The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bosch Security Systems, Inc. is under license. Other trademarks and trade names are those of their respective owners. Turning Bluetooth® ON or OFF To turn Bluetooth® ON or OFF, do the following: 1. From the DSP menu, scroll to CONTROL APP. 2. Select ON. OR Select OFF. RESET Menu The Reset menu is used to reset the loudspeaker to original factory settings.
ELX200 Powered Loudspeakers EKX-12P EKX-15P ELX112P ELX115P ZLX-12P ZLX-15P LED ON (Default) OFF LIMIT DISPLAY BACK LCD DIM ON (Default) OFF BRIGHT 5 (Default) 1 to 10 CONTRAST 5 (Default) 1 to 10 BACK STORE EXIT, 1, 2, 3, 4, 5, EXIT RECALL EXIT, 1, 2, 3, 4, 5, EXIT LOCK NO (Default) YES CONTROL APP ON OFF (Default) RESET RESET ARE YOU SURE? NO (Default) YES INFO [PRODUCT NAME] [FIRMWARE VERSION] ©2017 Electro-Voice EXIT Table 5.
en 29 Notice! The display returns to the home screen after two minutes of inactivity. MODE Menu The Mode menu is used to configure the type of sound the subwoofer delivers. ▪ MUSIC – is used for recorded music playback and electronic dance music applications. (Default) ▪ LIVE – is used for live sound applications. ▪ CLUB – is used for recorded electronic music playback. LOW PASS Menu The LOW PASS menu is used to select low pass frequency for proper summation with a fullrange loudspeaker.
ELX200 Powered Loudspeakers Notice! The customized user setting name can contain a combination of alphanumeric characters including spaces. The alphanumeric character range is A to Z and 0-9. The name field length is 12 characters. Storing customized user settings To store customized user settings, do the following: 1. From the DSP menu, scroll to STORE. 2. Push the MASTER VOL knob to select STORE. The store screen appears. 3. Push the MASTER VOL knob to select 1. 4.
en 31 CONTROL APP Menu The Control App menu is used to enable the QuickSmart Mobile wireless control and monitoring application. Available options for this selection are: ON or OFF. The default is OFF. Notice! Bluetooth® is available in select countries. Contact your nearest Electro-Voice dealer or Electro-Voice distributor for more information. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bosch Security Systems, Inc.
ELX200 Powered Loudspeakers 6 Pairing the QuickSmart Mobile application The EV QuickSmart Mobile app is available for download for the iOS 10 and higher tablets and smart phones from the iTunes App Store or Android Marshmallow and higher tablets and smart phones from the Google Play Store. Notice! The EV QuickSmart Mobile app is designed to only find speakers from Electro-Voice with Bluetooth® enabled. The EV QuickSmart Mobile app will not display other types of Bluetooth® devices, e.g.
en 7 Recommended configurations 7.1 Daisy-chaining full-range systems 33 LINE and MIC input level control is available for both INPUT 1 and INPUT 2. The 12 o’clock position is unity gain (no gain or attenuation) and the range to the right of zero (0) is for adjusting microphone levels.
ELX200 Powered Loudspeakers 7.2 MP3 player MONO configuration PUSH FOR DSP MASTER VOL AUX IN INPUT 1 AUX IN INPUT 1 L PUSH FOR DSP MASTER VOL QuickSmartDSP | MONITOR QuickSmartDSP | MONITOR L R OUTPUT R INPUT 2 OUTPUT INPUT 2 ELX200 ELX200 Notice! The direction of the arrow indicates the signal path. Mode: Music Location: Tripod Sub: Off Table 7.2: DSP settings loudspeaker on a tripod See also • 2017.06 | 01 | F.01U.326.
en 7.3 35 MP3 player STEREO configuration PUSH FOR DSP AUX IN AUX IN INPUT 1 INPUT 1 L MASTER VOL QuickSmartDSP | MONITOR PUSH FOR DSP MASTER VOL QuickSmartDSP | MONITOR L R R OUTPUT OUTPUT INPUT 2 INPUT 2 ELX200 ELX200 Mode: Music Location: Tripod Sub: Off Table 7.3: DSP settings loudspeaker on a tripod See also • Electro-Voice Full-Range loudspeaker DSP control menu, page 22 Installation manual 2017.06 | 01 | F.01U.326.
ELX200 Powered Loudspeakers 7.4 Using full-range systems as monitors LINE and MIC input level control is available for both INPUT 1 and INPUT 2. The 12 o’clock position is unity gain (no gain or attenuation) and the range to the right of zero (0) is for adjusting microphone levels.
en 7.
ELX200 Powered Loudspeakers 8 Troubleshooting Problem Possible Cause(s) Action 1. Amplifier Connect a known working test loudspeaker to the No sound amplifier outputs. If there is no sound, verify all the electronics are on, the signal routing is correct, the source is active; the volume is turned up, etc. Correct/repair/replace as necessary. If there is sound, the problem is wiring. Wiring Verify you have connected the correct cables to the amplifier.
en Problem Possible Cause(s) Action Incorrect gain Verify level controls of the source are properly structured structure or source by using the VU meter indicator on the LCD screen. If the input (mixing VU meter bar is solid or the system indicates LIMIT, the console/preamp) is input or source level is too high. 39 overdriven 7. Microphone Incorrect gain Reduce the microphone levels at the mixing console or produces acoustic structure input source.
ELX200 Powered Loudspeakers 9 Technical data ELX200-10P, ELX200-12P, and ELX200-15P . ELX200-10P ELX200-12P ELX200-15P Freq. Response (-3 dB): 59 Hz – 18 kHz1 57 Hz – 16 kHz1 55 Hz – 16 kHz1 Freq. Range (-10 dB): 53 Hz – 20 kHz1 51 Hz – 20 kHz1 48 Hz – 19 kHz1 130 dB2 132 dB2 Maximum SPL: 130 dB2 Coverage (H x V): 90° x 60° Power Rating: 1200 W LF Transducer: EVS-10M 254 mm (10 in) HF Transducer: EVS-15M 381 mm (15 in) DH-1C 1-inch titanium compression driver Crossover Freq.
en ELX200-12SP ELX200-18SP Grille: 18 AWG steel with powdercoat Color: Black Dimensions: 434 x 504 x 490 636 x 598 x 518 mm, (in) (17.1 x 19.8 x 19.3) (25.0 x 23.5 x 20.4) Net Weight: 19.1 kg (42.2 lb) 29.0 kg (64 lb) Shipping Weight: 22.3 kg (49.2 lb) Power Consumption: 41 33.1 kg (73.0 lb) 100 - 240 V~, 50 - 60 Hz, 1.8 A3 Half space measurement. 1 Maximum SPL is measured at 1 m using broadband pink noise at maximum output. 2 Current rating is 1/8 power. 3 9.
ELX200 Powered Loudspeakers 223 mm [9 in] 445 mm [18 in] 397 mm [16 in] 222 mm [9 in] 229 mm [9 in] 225 mm [9 in] 229 mm [9 in] 457 mm [18 in] 160 mm [6 in] Figure 9.4: ELX200-12SP dimensions 507 mm [20 in] 275 mm [11 in] 256 mm [10 in] 229 mm [9 in] 600 mm [24 in] 287 mm [11 in] 574 mm [23 in] 160 mm [6 in] LEFT VIEW FRONT VIEW RIGHT VIEW REAR VIEW TOP VIEW Figure 9.5: ELX200-18SP dimensions 9.2 Frequency Response Figure 9.
en 43 Figure 9.8: ELX200-15P Frequency response graph: Live, Music, Speech, and Club modes Figure 9.9: ELX200-12SP Frequency response graph: Live, Music, Speech, and Club modes Figure 9.10: ELX200-18SP Frequency response graph: Live, Music, Speech, and Club modes Electro-Voice Installation manual 2017.06 | 01 | F.01U.326.
Bosch Sicherheitssysteme GmbH Bosch Security Systems, Inc Robert-Bosch-Ring 5 12000 Portland Avenue South 85630 Grasbrunn Burnsville MN 55337 Germany USA www.boschsecurity.com www.electrovoice.