Owner's Manual
Table Of Contents
- Installation Manual
- Table of Contents
- 1 Safety
- 2 Welcome
- 3 System overview
- 4 Installation and Wiring
- 4.1 Step 1 — Cut the Hole
- 4.2 Step 2 — Install C-Ring and/or Tile Rails
- 4.3 Step 3 — Attach Wiring to the Terminal Connector
- 4.4 Step 4 — Secure the Cable to the Speaker
- 4.5 Step 5 — Mount the Speaker into the Ceiling
- 4.6 Step 6 — Connect an Auxiliary Support Line
- 4.7 Step 7 — Adjust Tap Selector
- 4.8 Step 8 — Attach the Grille
- 5 Troubleshooting
- 6 Technical data
- 7 Appendices
- Product Info
- Warranty
- Safety Notes
EVID Ceiling Speaker Systems Technical data | en 21
Electro-Voice Installation manual 2018.09 | 11 | F.01U.177.705
Specification EVID-C6.2 EVID C8.2
Recommended High-Pass
frequency:
60 Hz 55 Hz
Input configuration 8Ω; 70V/100V
70V/100V power taps 1.8 (70V only)/3.7/7.5/15/30 W
LF transducer 6.5 in (165 mm) high-compliance
driver (weatherized cone)
8 in (205 mm) high-compliance
driver (weatherized cone)
HF transducer 1 in (25 mm) Ti-coated dome 1 in (25 mm) Ti-coated dome
Mounting system Integrated 4-point toggle anchors
Acoustic design Ported cabinet, two-way design, internally damped, w/passive
crossover
Cabinet construction Steel enclosure and UL94V-0 rated baffle and bezel
Grille construction Powder-coated steel
Color White (paintable)
Cutout dimensions (diam.) 10.6 in (269 mm) 10.6 in (269 mm)
Dimensions (depth x diam.) 7.0 in x 11.8 in (190 mm x 300
mm)
10.0 in x 11.8 in (255 mm x 300
mm)
Net weight 10 lb (4.5 kg) 11 lb (5.0 kg)
Included accessories Tile bridge, mounting ring
Safety agency ratings UL 1480
Safe for use in air handling spaces per UL 2043
EVID C8.2LP and EVID C8.2HC
Specification EVID C8.2LP EVID C8.2HC
Frequency response 50 Hz - 20 kHz
Sensitivity (SPL 1 W/1 m) 91 dB 93 dB
Coverage pattern 110° conical 75° conical
Power handling (@ 8Ω) 75 W (with overload protection)
Rated Impedance 8 Ω
Recommended High-Pass
frequency:
55 Hz 55 Hz
Input configuration 8Ω; 70V/100V
70V/100V power taps 1.8 (70V only)/3.7/7.5/15/30 W 7.5 (70V only)/15/30/60 W
LF transducer 8 in (205 mm) high-compliance driver (weatherized cone)
HF transducer 1 in (25 mm) Ti-coated dome
Mounting system Integrated 4-point toggle anchors