Owner's Manual
Table Of Contents
- Installation Manual
- Table of Contents
- 1 Safety
- 2 Welcome
- 3 System overview
- 4 Installation and Wiring
- 4.1 Step 1 — Cut the Hole
- 4.2 Step 2 — Install C-Ring and/or Tile Rails
- 4.3 Step 3 — Attach Wiring to the Terminal Connector
- 4.4 Step 4 — Secure the Cable to the Speaker
- 4.5 Step 5 — Mount the Speaker into the Ceiling
- 4.6 Step 6 — Connect an Auxiliary Support Line
- 4.7 Step 7 — Adjust Tap Selector
- 4.8 Step 8 — Attach the Grille
- 5 Troubleshooting
- 6 Technical data
- 7 Appendices
- Product Info
- Warranty
- Safety Notes
22 en | Technical data EVID Ceiling Speaker Systems
2018.09 | 11 | F.01U.177.705 Installation manual Electro-Voice
Specification EVID C8.2LP EVID C8.2HC
Acoustic design Ported cabinet, two-way design,
internally damped, w/passive
crossover
Ported cabinet, waveguide-
coupled, two-way design,
internally damped, w/passive
crossover
Cabinet construction Steel enclosure and UL94V-0 rated baffle and bezel
Grille construction Powder-coated steel
Color White (paintable)
Cutout dimensions (diam.) 10.6 in (269 mm) 12.6 in (320 mm)
Dimensions (depth x diam.) 7.0 in x 11.8 in (190 mm x 300
mm)
11.9 in x 13.8 in (303 mm x 351
mm)
Net weight 11 lb (5.0 kg) 13.2 lb (6.0 kg)
Included accessories Tile bridge, mounting ring
Safety agency ratings: UL 1480
Safe for use in air handling spaces per UL 2043
EVID C10.1
Specification EVID C10.1
Frequency response 45 Hz - 150 Hz
Sensitivity (SPL 1 W/1 m) 94 dB
Power handling (@ 8Ω) 100 W (with overload protection)
Rated Impedance 8 Ω
Recommended High-Pass
frequency:
45 Hz
Input configuration 8Ω; 70V/100V
70V/100V power taps 7.5 (70V only)/15/30/60 W
LF transducer 10 in (260 mm) high-compliance driver (weatherized cone)
Mounting system Integrated 4-point toggle anchors
Acoustic design Ported cabinet, internally damped w/passive crossover
Cabinet construction Steel enclosure and UL94V-0 rated baffle and bezel
Grille construction Powder-coated steel
Color White (paintable)
Cutout dimensions (diam.) 12.6 in (320 mm)
Dimensions (depth x diam.) 11.9 in x 13.8 in (303 mm x 351 mm)
Net weight 15.5 lb (7.0 kg)
Included accessories Tile bridge, mounting ring