Owner's Manual

Electro-Voice | EVID-C6.2 Ceiling speaker 6.5" white
EVID-C6.2 Ceiling
speaker 6.5" white
▪ Full bandwidth overload protection
▪ Front baffle wattage tap adjustment
▪ Includes tile bridge and mounting ring for easy
installation
▪ UL1480A and CSA 22.2 205 certified
The Electro-Voice EVID-C6.2 loudspeaker system is a
complete two-way ceiling loudspeaker. The package
consists of a bezel assembly, grille, rear enclosure,
6.5-inch coax two-way loudspeaker and internal line-
matching transformer. The loudspeaker features a
waveguide coupled titanium coated dome tweeter. The
EVID-C6.2 loudspeaker utilizes a 2nd order crossover
network at 2.5 kHz, with a comprehensive protection
circuit to protect the network, woofer, and tweeter
drivers from excessive power levels. The EVID-C6.2
utilizes a transformer that offers a selection of 1.88
(70-V only), 3.75, 7.5, 15W or 30 watts delivered to the
loudspeaker system using either 70-V or 100-V lines, or
8 ohm bypass. Selection is via a convenient switch on
the front baffle. The perforated grille is finished in
semi-gloss white powder-coated enamel. The baffle
and bezel are constructed from UL 94V-0 rated ABS.
The rear enclosure is constructed from zinc-plated,
heavy gauge steel. The low profile enclosure makes it
easy to mount in very tight spaces. A rear cover, with
provisions for a junction box fitting, provides access to
a 4-pin terminal block that allows direct connection to
the speaker with 12 gauge wire and provides pass
through to additional speakers. A tile bridge is
included for safe suspension of the EVID-C6.2 ceiling
systems in a drop ceiling that uses mineral wool, or
other fiber-based ceiling tiles. The EVID line of ceiling
speakers has been designed to work together as a
complete system in a wide range of different ceiling
constructions. They provide wide dispersion, high-
efficiency, high-maximum output, ease of installation,
and wide-range reproduction of music or voice.
Technical specifications
Frequency response:
50 Hz - 20 kHz
Sensitivity (SPL 1 W/1 m):
90 dB
Coverage pattern:
120° conical
Power handling (@ 8Ω):
75 W (with overload protection)
Rated Impedance:
8 Ω
Recommended High-Pass
frequency:
60 Hz
Input configuration:
8Ω; 70V/100V
70V/100V power taps:
1.8 (70V only)/3.7/7.5/15/30 W
LF transducer:
6.5 in (165 mm) high-compliance
driver (weatherized cone)
HF transducer:
1 in (25 mm) Ti-coated dome
Mounting system:
Integrated 4-point toggle anchors
Acoustic design:
Ported cabinet, two-way design,
internally damped, w/passive
crossover