Owner's Manual
Table Of Contents
- Installation Manual
- Table of Contents
- 1 Safety
- 2 Welcome
- 3 System overview
- 4 Installation and Wiring
- 4.1 Step 1 — Cut the Hole
- 4.2 Step 2 — Install C-Ring and/or Tile Rails
- 4.3 Step 3 — Attach Wiring to the Terminal Connector
- 4.4 Step 4 — Secure the Cable to the Speaker
- 4.5 Step 5 — Mount the Speaker into the Ceiling
- 4.6 Step 6 — Connect an Auxiliary Support Line
- 4.7 Step 7 — Adjust Tap Selector
- 4.8 Step 8 — Attach the Grille
- 5 Troubleshooting
- 6 Technical data
- 7 Appendices
- Product Info
- Warranty
- Safety Notes
8 en | System overview EVID Ceiling Speaker Systems
2018.09 | 11 | F.01U.177.705 Installation manual Electro-Voice
3.3 Product Feature Identification
EVID C4.2, EVID-C6.2, EVID C8.2, EVID C8.2LP, EVID C8.2HC, and EVID C10.1 models
1
2
3
4
10
Grille
8
7
6
5
9
Figure3.2: Bottom of the speaker (left); Top of the speaker (center); Grille (right)
Item Description Item Description
1 Steel back can 6 Removable input terminal connector
2 Mounting screws 7 Seismic tab (auxiliary support ring)
3 Tap selector 8 Strain relief fitting
4 Grille safety tether hole 9 Terminal cover plate
5 Rotating mounting tabs 10 Grille safety tether
C4.2LP model
1
2
3
4
10
5
8
11
6
Grille
12
7
9
Figure3.3: Bottom of the speaker (left two illustrations); Top of the speaker (center); Grille (right)
Item Description Item Description
1 Mounting screws 7 Terminal cover plate
2 Grille safety tether hole 8 Removable input terminal connector
3 Tap selector 9 Terminal cover latch
4 Rotating mounting tabs 10 Steel back can
5 Terminal cover locking screw 11 Seismic tab (auxiliary support ring)
6 Strain relief fitting 12 Grille safety tether