Owner's Manual
Table Of Contents
- Installation Manual
- Table of Contents
- 1 Safety
- 2 Welcome
- 3 System overview
- 4 Installation and Wiring
- 4.1 Step 1 — Cut the Hole
- 4.2 Step 2 — Install C-Ring and/or Tile Rails
- 4.3 Step 3 — Attach Wiring to the Terminal Connector
- 4.4 Step 4 — Secure the Cable to the Speaker
- 4.5 Step 5 — Mount the Speaker into the Ceiling
- 4.6 Step 6 — Connect an Auxiliary Support Line
- 4.7 Step 7 — Adjust Tap Selector
- 4.8 Step 8 — Attach the Grille
- 5 Troubleshooting
- 6 Technical data
- 7 Appendices
- Product Info
- Warranty
- Safety Notes
EVID Ceiling Speaker Systems System overview | en 9
Electro-Voice Installation manual 2018.09 | 11 | F.01U.177.705
EVID Ceiling Series Systems (sold in pairs)
Model Part No Description
EVID C4.2 4" coaxial speaker with horn-loaded, Ti-coated tweeter
EVID-C4.2LP 4" coaxial speaker with horn-loaded, Ti-coated tweeter
EVID-C6.2 6.5" coaxial speaker, Ti-coated tweeter
EVID C8.2 8" coaxial speaker with horn-loaded, Ti-coated tweeter
EVID C8.2LP Same as C8.2 above except with low-profile back can
EVID C8.2HC 8" waveguide-coupled coaxial speaker with horn-loaded, Ti-coated tweeter
EVID C10.1 10" High performance subwoofer
EVID Series Ceiling Mount Speaker Accessories
Model Part No. Description
RR-42-B Rough-in plate for new construction involving the EVID C4.2 (package of 4)
RR-82 Rough-in plate for new construction involving the EVID-C4.2LP, EVID-C6.2, C8.2,
and C8.2LP (package of 4)
RR-810 Rough-in plate for new construction involving the EVID C8.2HC and C10.1 (package
of 4)
RPK-42 Rough-in package for new construction involving the C4.2 speaker only (package of
2)
RPK-82 Rough-in package for new construction involving the EVID-C4.2LP, EVID-C6.2, C8.2,
and C8.2LP speaker only (package of 2)
RPK-810-B Rough-in package for new construction involving the C8.2HC and C10.1 speaker
only (package of 2)
NOTE: All products are not available in all regions.