User Manual

18 en | Amplifier DSP EVOLVE 50 Portable Column System
2018.02 | 03 | F.01U.341.540 Installation manual Electro-Voice
EXIT Menu
The Exit menu is used to return to the home screen.
Notice!
The display returns to the home screen after two minutes of inactivity.
MODE Menu
The Mode menu is used to configure the type of sound the subwoofer delivers.
– MUSIC – is used for recorded music playback and electronic dance music applications.
(Default)
– LIVE – is used for live sound applications.
– SPEECH – is used for spoken word applications.
– CLUB – is used for recorded electronic music playback.
SUB LEVEL Menu
The Sub Level menu allows independent gain control of the subwoofer output. Changes to
this parameter effectively change the crossover of the EVOLVE 50 system. The default setting
of 0 dB is recommended for best audio performance.
The range is MUTE, -80 dB to +10 dB.
The default is 0 dB.
TREBLE Menu
The Treble menu is used to adjust the high frequency performance of the loudspeaker for
different applications or personal preference. The parameter controls a high shelving filter
that is centered on 6 kHz.
The range is -12 dB to +6 dB.
The default is 0 dB.
MID Menu
The MID menu is used to set the gain of the MID peak filter.
The range is -12 dB to +6 dB.
The default is 0 dB.
MID FREQ Menu
The MID Freq menu is used to set the center frequency of the MID peak filter.
The range is 200 -12000 Hz.
The default is 1200 Hz.
BASS Menu
The Bass menu item is used to configure the low frequencies of sound.
The range is -12 dB to +6 dB.
The default is 0 dB.
PHANTOM 1 or PHANTOM 2 Menu
The Phantom 1 or Phantom 2 menu is for activating phantom power (+15 V) of audio INPUT 1
or 2 whenever a suitable condenser microphone is being used. Available options for this
selection are: ON or OFF.
The default is OFF.
MIX OUT Menu
The Mix Out menu is used to select which signal of INPUT 3 AUX IN should be output at MIX
OUT and which signal should be delivered by the loudspeaker.