User manual

EVU Technical Manual

To install the assembled U-Bracket to the enclosure, do the following:

NOTE: All EVU systems are assembled in the following manner:

Tools: #2 Phillips screwdriver

1. Remove two (2) M8 flat head screws (C) from each end of the loudspeaker enclosure (A).

2. Position the loudspeaker enclosure inside the universal u-bracket (B).

3. Place one (1) M8 rubber washer (D) between the enclosure’s screw hole and the universal u-bracket on each side of

the enclosure.

NOTE: See Figure 29 for holes specific to the system being mounted.

4. Securely fasten one (1) M8 panhead screw through the bracket, washer, and enclosure on each side of the

assembly.

5. Position the loudspeaker at the desired angle.

6. Securely tighten the M8 flat head screw.

FIGURE 30. EVU-1062 Assembly—Example