User Manual

34
en |
RE3-RX receiver
RE3 UHF
Wireless
2018
-12 | 01 | F.01U.362.808 Installation manual Electro-
Voice
4
Press SET to save changes. The display returns to the home
screen where the icon no longer appears.
7.3.15 Adjusting display options: contrast and brightness
Adjustments to the display contrast and brightness are made in menu item a, Display Options.
1
Press the ▼ button to scroll down to Display Options from the
main menu. Select by pressing SET to enter the Display Options
screen where the screen shows the current settings.
2
Contrast setting is highlighted. To make any changes, press the
▲ button to assign higher contrast value, or press the ▼ button to
assign lower contrast value. Press set to move to brightness.
3
Current brightness value is highlighted. To make any changes,
press the ▲ button to assign higher brightness value, or press the
▼ button to assign lower brightness value.
4
Press SET to save changes. The display then returns to the main
menu.
5 Press SET to save. The display returns to the main menu.
6
Either scroll ▼down to Exit and press SET, or briefly press SYNC
on the receiver front panel to return to the home screen. The
contrast and brightness changes will impact the appearance of all
screens.
OR