Installation Manual

RE3 UHF Wireless RE3-RX receiver | en 27
Electro-Voice Installation manual 2018.12 | 01 | F.01U.362.808
4
Either press SET to save the channel displayed and exit, or press
▲ or ▼ to scroll through to locate the next open channel. A brief
scan occurs while locating the next clear channel. Some channel
numbers may be skipped because they were not clear at the time
of the scan. Press SET to save. This selects that group and
channel the set will operate on.
5 This returns to Current Group on the scan menu.
6
Either scroll ▼down to Exit and press SET, or briefly press SYNC
on the receiver front panel to return to the home screen. The
selected Group/Channel and associated Frequency displays on
the home screen.
OR
7.3.6 Return
Selecting Return in the Scan menu returns to the main menu.
1
While in the Scan menu, press the ▼ button to scroll down to
Return. Press SET.
2 The screen returns to the main menu.
3
Either scroll ▼down to Exit and press SET, or briefly press SYNC
on the receiver front panel to return to the home screen.
OR
4 Home screen
.
7.3.7 Manually setting frequency
Setting custom frequencies manually does not benefit from the scan function of locating clear
channels. It is important to note that manually entered custom frequencies may experience
interference, which can be avoided by using the scan function.