ZLX Portable Loudspeaker Series en Installation manual
ZLX Portable Loudspeaker Series Table of contents | en 3 Table of contents 1 Safety 4 1.1 Important safety instructions 4 1.2 Suspension 5 1.3 FCC Information 5 1.4 Precautions 6 1.5 Certifications 7 1.6 Notices 2 Description 10 2.1 Short information 10 2.2 System features 10 2.3 Quick setup 12 2.4 Quick setup – wireless streaming 13 3 Tripod, pole mount, and floor monitor operation 14 3.1 Tripod or pole mount 14 3.2 Floor monitor 16 4 Amplifier DSP 17 4.
en | Safety ZLX Portable Loudspeaker Series 1 Safety 1.
ZLX Portable Loudspeaker Series Safety | en 5 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. No naked flame sources, such as lighted candles, should be placed on the apparatus. 16.
en | Safety ZLX Portable Loudspeaker Series Notice! This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
ZLX Portable Loudspeaker Series Safety | en 7 Do not use Electro-Voice loudspeakers in an environment where temperatures ! are below 0°C (32°F) or exceed +35°C (95°F). Never expose an Electro-Voice loudspeaker to rain, water, or high moisture. ! Electro-Voice loudspeakers are easily capable of generating sound pressure ! levels sufficient to cause permanent hearing damage to anyone within normal coverage distance.
1.6 en | Safety ZLX Portable Loudspeaker Series Notices Old electrical and electronic appliances Electrical or electronic devices that are no longer serviceable must be collected separately and sent for environmentally compatible recycling (in accordance with the European Waste Electrical and Electronic Equipment Directive). To dispose of old electrical or electronic devices, you should use the return and collection systems put in place in the country concerned.
ZLX Portable Loudspeaker Series Safety | en 9 For use in China: CHINA ROHS DISCLOSURE TABLE Electro-Voice Installation manual 2019-05 | 03 | F.01U.319.
2 en | Description ZLX Portable Loudspeaker Series Description Thank you for choosing an Electro-Voice portable loudspeaker system. Please take time to consult the manual to understand all the features built into your EV system and fully utilize its performance capabilities. ZLX portable loudspeakers offer the best performance and reliability in their class - with components and engineering that work together to make it quicker and easier than ever to take control of your sound, whatever the gig.
ZLX Portable Loudspeaker Series – Description | en 11 EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading. – Three optimally located handles combined with a rugged composite structure provides the most portable professional sound speaker on the market.
2.3 en | Description ZLX Portable Loudspeaker Series Quick setup The ZLX series loudspeakers from Electro-Voice are fully integrated audio systems with carefully matched electronics and transducers. These products make it easy to setup a high quality sound system quickly with a minimum amount of cables and external electronics. Full-Range powered loudspeaker Models: ZLX-12P , ZLX-12BT, ZLX-15P,and ZLX-15BT To set up a full-range powered loudspeaker, do the following: Step 1.
ZLX Portable Loudspeaker Series 2.4 Description | en 13 Quick setup – wireless streaming Wireless streaming For ZLX-12BT and ZLX-15BT models, follow these instructions to quickly and correctly pair and tune your system for wireless streaming from a Bluetooth® enabled mobile device. To pair the system for wireless streaming, do the following: 1. Using the MASTER VOL knob, turn the output gain LEVEL down to MUTE. 2. Push the MASTER VOL knob. The DSP Control menu appears. 3.
en | Tripod, pole mount, and floor monitor operation ZLX Portable Loudspeaker Series 3 Tripod, pole mount, and floor monitor operation 3.1 Tripod or pole mount ZLX portable loudspeakers mount on a tripod stand or on a pole above a subwoofer. Mounting a loudspeaker on a tripod stand Figure 3.1: Full-Range models on a tripod stand Caution! ! Tripod is not evaluated for safety with this loudspeaker.
ZLX Portable Loudspeaker Series Tripod, pole mount, and floor monitor operation | en 15 Mounting a loudspeaker on a pole Caution! ! We recommend that two or more persons lift and place heavier loudspeakers. Single person lift and placement of heavier loudspeakers could cause injury. To mount a loudspeaker on a pole, do the following: 1. Place the subwoofer on a level stable surface. 2. Insert the pole into the pole cup on the top of the subwoofer. 3.
3.2 en | Tripod, pole mount, and floor monitor operation ZLX Portable Loudspeaker Series Floor monitor ZLX portable loudspeakers may be used as a floor monitor by placing the loudspeaker on the integral monitor angle. Setting up as a floor monitor To set up a loudspeaker as a floor monitor, do the following: 1. Place the loudspeaker on a level and stable surface. 2. Safely route cables to prevent injury to performers, production crew, and audience members.
ZLX Portable Loudspeaker Series Amplifier DSP | en 4 Amplifier DSP 4.1 Amplifier DSP controls 17 The amplifier has a combination of controls and connectors to ensure the most versatile loudspeaker system. Full-Range loudspeaker control and monitoring interface The full-range loudspeaker DSP control menu selections are available for the powered ZLX loudspeakers. 1 2 8 3 7 6 ZLX 5 4 Figure 4.1: Full-Range loudspeaker amplifier panel 1. LCD - DSP control and monitoring interface. 2.
en | Amplifier DSP ZLX Portable Loudspeaker Series 6. INPUT - Balanced input for the connection of signal sources like mixing consoles, instruments, or microphones. Connections can be established using ¼ inch TRS or XLR connectors. 7. OUTPUT - XLR output sends the mix of all input signals to another loudspeaker or subwoofer. INPUT LEVEL controls the signal level to OUTPUT. The MASTER VOL or DSP control settings do not affect OUTPUT.
ZLX Portable Loudspeaker Series Amplifier DSP | en 19 System protection System protection limiters indicate when a system is exceeding recommended usage by indicating CLIP or LIMIT on the LCD display. CLIP Figure 4.3: Clipping system status CLIP indicates the signal to the loudspeaker is too high, resulting in a clipped signal into the loudspeaker. If CLIP is shown, reduce the input gain knob and/or the signal on the mixer or source equipment. LIMIT OR Figure 4.
en | Amplifier DSP 4.3 ZLX Portable Loudspeaker Series DSP controls An integrated DSP control menu allows the user to select multiple DSP system settings on the loudspeaker. To access the DSP controls menu, do the following: 1. Push the MASTER VOL knob. The DSP Control menu appears. 2. Using the MASTER VOL knob, scroll through the menu items. 3. Push the MASTER VOL knob to select the menu item you want to modify. The focus moves to the parameters on the right side of the DSP menu. 4.
ZLX Portable Loudspeaker Series Amplifier DSP | en 21 80Hz 100Hz 120Hz 150Hz ELX200-12SP ELX200-18SP EKX-15SP EKX-18SP ELX118P TREBLE 0 db (Default) -10 dB to +10 dB BASS 0 db (Default) -10 dB to +10 dB MIX OUT L + R (Default) R LED ON (Default) OFF LIMIT DISPLAY LCD DIM ON (Default) OFF BRIGHT 5 (Default) 1 to 10 CONTRAST 5 (Default) 1 to 10 STORE EXIT, 1, 2, 3, 4, 5, EXIT RECALL EXIT, 1, 2, 3, 4, 5, EXIT STREAMING OFF (Default) (ZLX-12BT and ZLX-15BT) PAIRING ON LOCK ON OFF (Def
en | Amplifier DSP ZLX Portable Loudspeaker Series INFO [PRODUCT NAME] [FIRMWARE VERSION] ©YYYY ELECTRO-VOICE EXIT Tab. 4.1: Full-Range Loudspeaker DSP Control Menu EXIT menu The Exit menu is used to return to the home screen. Notice! The display returns to the home screen after two minutes of inactivity. MODE menu The Mode menu is used to configure the type of sound the loudspeaker delivers. Available options for this selection are: MUSIC, LIVE, SPEECH and CLUB.
ZLX Portable Loudspeaker Series Amplifier DSP | en 23 The default is zero. BASS menu The Bass menu is used to adjust the low frequency performance of the loudspeaker for different applications or personal preference. The parameter controls a parametric EQ filter that is centered on 60 Hz. The default is zero. MIX OUT menu The Mix Out menu is used to select which channel of the BT signal should be output at MIX OUT and which channel should be delivered by the loudspeaker.
en | Amplifier DSP ZLX Portable Loudspeaker Series The characters appear. 5. Push the MASTER VOL knob to select the desired character. 6. Turn the MASTER VOL knob to move to the next character entry. Continue selecting characters until the desired name is entered. 7. Use the MASTER VOL knob to scroll to SAVE. 8. Push the MASTER VOL knob to select SAVE. 9. Repeat steps 3 through 8 to store additional customized user settings. 10. Select EXIT to return to the home screen.
ZLX Portable Loudspeaker Series 1. Amplifier DSP | en 25 From the DSP menu, select RESET. The reset are you sure message appears. 2. Select YES. The loudspeaker restarts and resets the system to the original factory settings. Notice! Performing a reset erases the user customized settings saved under the STORE menu. The five user customized settings in the STORE and RECALL menus return to . INFO menu The Information menu is used to display the product name and firmware version.
en | Recommended configuration ZLX Portable Loudspeaker Series 5 Recommended configuration 5.1 Powered loudspeakers 5.1.1 Daisy-chaining full-range systems LINE and MIC input level control is available for both INPUT 1 and INPUT 2. The 12 o’clock position is unity gain (no gain or attenuation) and the range to the right of zero (0) is for adjusting microphone levels. ZLX ZLX Notice! The direction of the arrow indicates the signal path. Mode: Speech Location: Pole Sub: Off Tab. 5.
ZLX Portable Loudspeaker Series 5.1.2 Recommended configuration | en 27 MP3 player MONO configuration ZLX ZLX Notice! The direction of the arrow indicates the signal path. Mode: Music Location: Pole Sub: Off Tab. 5.3: DSP settings loudspeaker on a tripod See also Electro-Voice – Tripod or pole mount, page 14 – Amplifier DSP, page 17 Installation manual 2019-05 | 03 | F.01U.319.
en | Recommended configuration 5.1.3 ZLX Portable Loudspeaker Series Using full-range systems as monitors LINE and MIC input level control is available for both INPUT 1 and INPUT 2. The 12 o’clock position is unity gain (no gain or attenuation) and the range to the right of zero (0) is for adjusting microphone levels. ZLX ZLX Notice! The direction of the arrow indicates the signal path. Mode: Live Location: Monitor Sub: Off Tab. 5.
ZLX Portable Loudspeaker Series 5.1.4 Recommended configuration | en 29 Stacking full-range systems with subwoofers ZLX-12BT ELX200-18SP ZLX PUSH FOR DSP PUSH FOR DSP MASTER VOL QuickSmartDSP | MONITOR MASTER VOL QuickSmartDSP | MONITOR ZLX ELX200 ELX200 INPUT 1 OUTPUT 1 INPUT 1 OUTPUT 1 WARNING: TO REDUCE RISK OF SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. WARNING: TO REDUCE RISK OF SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
en | Recommended configuration 5.1.5 ZLX Portable Loudspeaker Series Wireless audio STEREO configuration Wireless audio streaming via Bluetooth® is available for ZLX-12BT and ZLX-15BT loudspeakers. Bluetooth® is available in select countries. This configuration can be used to connect two speakers and split the incoming Bluetooth® signal to create a stereo image between two speakers. Parameters and mobile device pairing is to be done on the LEFT speaker.
ZLX Portable Loudspeaker Series Recommended configuration | en 5.2 Passive loudspeakers 5.2.1 Basic stereo system using full-range systems 31 Basic stereo system using ZLX-12 or ZLX-15 systems (ZLX-15 versions shown). ZLX-12 or ZLX-15 Output B 45 Hz high pass filter (from mixer or processor) Output A ZLX-12 or ZLX-15 Q99 Amplifier Input B Input A Mixer NL4 Pin Configuration Pin 1+ and 1- Used Pin 2+ and 2- Not used Caution! ! Do not exceed the maximum load rating of the amplifier.
en | Recommended configuration 5.2.2 ZLX Portable Loudspeaker Series Using full-range systems as stage monitors Multiple ZLX-12 or ZLX-15 systems in monitor position (ZLX-15 versions shown). Output B 45 Hz high pass filter Output A Q99 Amplifier Input B Input A Mixer NL4 Pin Configuration Pin 1+ and 1- Used Pin 2+ and 2- Not used Caution! ! Do not exceed the maximum load rating of the amplifier. Amplifier Load (per Output Channel) 2019-05 | 03 | F.01U.319.
ZLX Portable Loudspeaker Series 5.2.3 Recommended configuration | en 33 Stacking full-range systems with subwoofers This configuration allows a user to increase the low frequency performance without using additional amplifier channels (ZLX-15 and EKX-18S versions shown).
en | Troubleshooting 6 ZLX Portable Loudspeaker Series Troubleshooting Problem Possible Cause(s) Action 1. Amplifier Verify all the electronics are on, the signal routing is No sound correct, the source is active; the volume is turned up, etc. Correct/repair/replace as necessary. If there is still no sound, then the problem may be wiring. Wiring Verify you have connected the correct cables to the amplifier. Play something at a low level through the amplifier.
ZLX Portable Loudspeaker Series Problem Troubleshooting | en Possible Cause(s) Action Incorrect gain Verify level controls of the source are properly structured structure or source by using the VU meter indicator on the LCD screen. If the input (mixing VU meter bar is solid or the system indicates LIMIT, the console/preamp) is input or source level is too high. 35 overdriven 7.
en | Troubleshooting Problem ZLX Portable Loudspeaker Series Possible Cause(s) Action especially away from 2.4gHz routers and microphone receivers. If the problem persists, revert back to a wired connection while at that particular venue. If these suggestions do not solve your problem, contact your nearest Electro-Voice dealer or Electro-Voice distributor. See also – 2019-05 | 03 | F.01U.319.
ZLX Portable Loudspeaker Series 7 Technical data | en 37 Technical data Powered loudspeakers ZLX-12BT Frequency response (-3 dB)1: 65 Hz - 18 kHz Frequency range (-10 dB): 50 Hz - 20 kHz Maximum SPL2: 126 dB Coverage (H x V): 90° x 60° Power rating: 1000 W LF Transducer: EVS-12K, 300 mm (12 in) woofer HF Transducer: DH-1K Connectors: (2) XLR/TRS combo jack (1) 3.
en | Technical data ZLX Portable Loudspeaker Series Color: Black Dimensions (H x W x D): 685 mm x 426 mm x 383 mm (27 in x 17 in x 15 in ) Net weight: 17.3 kg (38.0 lb) Shipping weight: 23.0 kg (50.78 lb) Power consumption3: 100 - 240 V~, 50 - 60 Hz, 0.8 - 0.5 A 1 Full-Space measurement using the MUSIC DSP preset. 2 Maximum SPL is measured at 1 m using broadband pink noise at maximum output. 3 Current rating is specified at 1/8 full output power.
ZLX Portable Loudspeaker Series Technical data | en 39 Power rating: 1000 W LF Transducer: EVS-15L, 380 mm (15 in) woofer HF Transducer: DH-1K Connectors: (2) XLR/TRS combo jack (1) 3.5 mm input and (1) XLR link output Enclosure: Polypropylene Grille: 18 Gauge steel with black powder coat Color: Black Dimensions (H x W x D): 685 mm x 423 mm x 383 mm (27 in x 17 in x 15 in) Net weight: 17.3 kg (38.0 lb) Shipping weight: 23.0 kg (50.7 lb) Power consumption3: 100 - 240 V~, 50 - 60 Hz, 0.8 - 0.
en | Technical data ZLX Portable Loudspeaker Series Shipping weight: 18.0 kg (39.6 lb) 1 Full Space Measurement, will have low frequency extension when mounted on floor or wall. 2 Maximum SPL is measured at 1 m using broadband pink noise at maximum output. ZLX-15 Frequency response (-3 dB)1: 56 Hz - 18 KHz Frequency range (-10 dB): 44 Hz - 20 kHz Axial sensitivity: 96 dB Maximum SPL2: 126 dB Recommended High-Pass Freq.
ZLX Portable Loudspeaker Series 7.1 Technical data | en 41 Dimensions Powered version shown. 610 mm [24 in] 356 mm [14 in] ZLX 356 mm [14 in] 183 mm [7 in] 43.4° 43.4° Figure 7.1: Dimensions: 12" ZLX models 423 mm [17 in] 685 mm [27 in] ZLX 383 mm [15 in] 187 mm [7 in] 43.4° 43.4° Figure 7.2: Dimensions: 15" ZLX models Electro-Voice Installation manual 2019-05 | 03 | F.01U.319.
7.2 en | Technical data ZLX Portable Loudspeaker Series Frequency response Powered loudspeakers Figure 7.3: Frequency response: 12" powered ZLX models Figure 7.4: Frequency response: 15" powered ZLX models Passive loudspeakers Figure 7.5: Frequency response: 12" passive models 2019-05 | 03 | F.01U.319.
ZLX Portable Loudspeaker Series Technical data | en 43 Figure 7.6: Frequency response: 15" passive models Electro-Voice Installation manual 2019-05 | 03 | F.01U.319.
Bosch Sicherheitssysteme GmbH Bosch Security Systems, Inc Robert-Bosch-Ring 5 12000 Portland Avenue South 85630 Grasbrunn Burnsville MN 55337 Germany USA www.boschsecurity.com www.electrovoice.com © Bosch Sicherheitssysteme GmbH, 2019 © Bosch Security Systems, Inc.