User Guide

Electro-Voice ZLX Series Quick Start Guide

Part Number: F01U280690 Rev. 01

Step Illustration

1. Connect the AC power cord from a grounded line

receptacle to MAINS IN.

2. Switch POWER to ON.

3. All input channels should be turned to the left before

connecting any jack.

4. Connect the 3.5 mm mini jack, XLR or TRS cable from an

audio source to AUX IN (A), INPUT 1 (B) or INPUT2.

Quick Start Guide for ZLX-12P and ZLX-15P Loudspeakers

A. ZLX-12P unit, 12” Two-Way Powered Loudspeaker

ZLX-15P unit, 15” Two-Way Powered Loudspeaker

B. ZLX Series Loudspeaker Owner’s Manual

C. Power Cord

Instructions

A CB

Packing List

PAGE 1
Quick Start Guide for ZLX-12P and ZLX-15P Loudspeakers Packing List A. ZLX-12P unit, 12” Two-Way Powered Loudspeaker OR ZLX-15P unit, 15” Two-Way Powered Loudspeaker B. ZLX Series Loudspeaker Owner’s Manual C. Power Cord A B C Instructions Step Illustration 1. Connect the AC power cord from a grounded line receptacle to MAINS IN. 2. Switch POWER to ON. 3. All input channels should be turned to the left before connecting any jack. 4. Connect the 3.
PAGE 2
Step Illustration 5. Push and hold DSP knob to select application MODE and LOCATION. Select EXIT to return to the home screen. 6. From the DSP home screen increase the input gain knob (C) while viewing the VU meters. (D) To ensure proper gain structure signal present will peak at no more than 75% in the VU meters. Decrease gain by turning the knob to the left to avoid clipiing if to much signal is present. C D 7. Slowly adjust MASTER VOL to the desired volume.