Owner manual

8
Technical Specification AW 400
The following technical data were measured on randomized test objects and are
typical data.
All measurements are made with main voltage 120/240 V 50Hz / 60Hz.
Main voltage 120 / 240 V. Clipping point of the amplifier is set to a level
where total harmonic distortion (THD) is 0.2%.
Output impedance (20-20kHz) ............................ <0.01ohm
Input impedance mono ....................................... 330kohm
Input sensitivity for rated output ........................... 1.6V (adjustable)
Max. peak current ................................................ >150A
THD (1kHz half power, 8ohm) ............................. <0.006%
THD (1kHz –1dB, 8ohm) .................................... <0.007%
Noise (input shortened) ...................................... <130uV
Frequency response ........................................... DC-65kHz -3dB
Rated output power
10% change in line voltage will give app. 20% change in output power.
8 ohm 400 W
4 ohm 765 W
2 ohm 1010 W
Dimensions
Width 358mm (14,1)
Depth 470mm (18,5”)
Height 261mm (10,2”)
Weight 25kg (55lbs)
The manufacturer reserves the right to alter these specifications without further notice