Owner`s manual

8
ENG
Universal Remote Control ECT 4
Unpacking the ECT 4 Remote Control
Immediately upon receipt of the ECT 4, inspect the carton for possible dam-
age during shipment. The carton and packaging have been designed to
provide the safest possible protection for transport of your remote control.
Unpack the unit carefully. Save all packaging materials for future shipment.
The contents of the carton
• 1 pc. ECT 4 Remote control.
• 1 pc. Charging docking station.
• 1 pc. USB cable.
• 1 pc. Power supply for charging docking station.
Set up procedure
Before use, charge the ECT 4 at least 2 hours.
Charging from the mains
1. Connect the USB cable to the power supply unit and docking station.
2. Place the ECT 4 Remote control in the docking station.
Charging from mini USB
1. Connect the USB cable to a computer or to power supply unit directly.
2. Connect the mini USB plug to ECT 4.
Battery status indicator
The battery status indicator shows the current charge status of the battery
as well as an indication if the remote is currently connected to power and
whether it is charging or not.
Battery full, remote connected to power but not charging
Battery nearly full, remote connected to power and charging
Battery empty, remote not connected to power
ECT 4 Remote Control