Owner manual

SETUP MENU OPTIONS
72
Device Setup
The “Device Setup” section of the Setup Menu system allows you to configure additional player options related
to the hardware and control functions. The menu items in this section are:
Playback Setup
Video Setup
Audio Format Setup
Audio Processing
Device Setup
Network Setup
Exit
Firmware Information
Firmware Upgrade
Firmware Notification
Remote Control Code
HDMI CEC
Front Panel Display
Persistent Storage
On
Code 1
Off
Standard
Setup Menu
Exit
View current firmware version and system information
1. Firmware Information: To display the currently installed firmware version.
2. Firmware Upgrade: To upgrade the player’s firmware. This operation is only available when the
playback is completely stopped or when there is no disc loaded.
The firmware is the system software that controls the features and functions of the player. Since
the Blu-ray Disc specifications are new and evolving, it is possible that a Blu-ray disc manufactured
after the player was manufactured uses certain new features of the Blu-ray Disc specifications. To
ensure the best possible viewing experience, the player may need a firmware update from time to
time. Please visit the ELECTROCOMPANIET Digital web site http://www.electrocompaniet.no
to
check for firmware updates and instructions on installing the updates.
There are three ways to upgrade the player’s firmware. The options are:
• Via USB – You may download the firmware files from the ELECTROCOMPANIET Digital
web site to a USB drive and then use the USB drive to upgrade the player. Please follow
the instructions on the firmware download web page.
• Via Disc – You may requests a firmware upgrade disc from ELECTROCOMPANIET Digital
or download a disc image from the ELECTROCOMPANIET Digital web site and burn an
upgrade disc. Please follow the instructions that come with the upgrade disc.
• Via Network – If the player has a working Internet connection (see page 18 and 75), you
may upgrade the player directly over the Internet. Please follow the instructions on your TV
screen.
3. Firmware Notification: To set whether the player should automatically check if new firmware
versions are available on the Internet server and notify the user about new firmware. The options
are:
• On – Check for new firmware version automatically and notify the user about new firmware.
Requires a working network connection.
• Off – Do not check for new firmware version automatically.
4. Remote Control Code: The ELECTROCOMPANIET EMP 2 Blu-ray Disc Player can respond to
one of 4 sets of remote control codes. The default is “Code 1”. If you have other