Owner manual

Firmware Upgrade Instructions:
Warning: Although firmware upgrade is an easy and usually trouble-free process, it is important to
ensure that the power supply to the player is stable, and the upgrade process is not interrupted. A failed
firmware upgrade can render the player unusable.
There are three ways to upgrade the firmware. If your player has an Internet connection, the easiest
way to upgrade the firmware is the "Via Network" method. If you have a USB thumb drive, you may
choose the "Via USB" method. You can also use the "Via Disc" method by preparing a firmware
upgrade CD yourself or requesting a firmware CD from Electrocompaniet customer service
Firmware Upgrade via the Internet
1. Turn on your TV display and the EMP 2 player. Eject the disc tray from the EMP 2
player and remove any disc. Make sure that the player and the player is not playing any
content.
2. Press the SETUP button on the remote control to enter the setup menu. Select Device
Setup, Firmware Upgrade, and then Via Network.
3. The player will start searching for the new firmware from an Electrocompaniet firmware
server. Please follow the on-screen instructions to complete the firmware upgrade
process. Use the remote control to respond to on-screen prompts. Do not use the front
panel buttons because the front panel buttons will stop working during the upgrade
process.
4. DO NOT ATTEMPT TO TURN OFF THE PLAYER, UNPLUG THE POWER, OR
PRESS ANY BUTTONS OTHER THAN NECESSARY TO RESPOND TO THE
ON-SCREEN PROMPT DURING THE REMAINING UPGRADE PROCESS.
5. In order to complete the firmware upgrade process, the player will turn off automatically.
6. Turn on the player again after the firmware upgrade process is completed. Repeat from
Step 2 above until the player reports that it already has the latest version. This will
ensure that the player downloads and installs all parts of the firmware update.
7. Check the new firmware version by going to the setup menu, and then selecting Device
Setup - Firmware Information.
8. Congratulations! You have just completed the firmware upgrade.
84