Manual

INSTALLATION

Alternate Audio Connections

Connecting to an A/V Receiver or Amplifier via Analog or XLR Outputs

x Please use up to 8 RCA-style audio interconnect cables (not included) to connect the FL (Front Left),

FR (Front Right), SL (Surround Left), SR (Surround Right), C (Center), SW (SubWoofer), SBL

(Surround Back Left) and SBR (Surround Back Right) analog output terminals of the EMP 3 to the

corresponding multi-channel analog audio input jacks of your A/V receiver or amplifier.

x If the A/V receiver or amplifier

only ha

s 5.1ch audio inputs, do not connect the SBL (Surround Back

Left) and SBR (Surround Back Right)

terminals, and set the Down Mix option in the Setup Menu to

5.1 to make sure that any 7.1 channel signals are converted to 5.1 channels (refer to Down Mix Mode

on page 68).

x If your audio system offers only stereo audio inputs, or if you would like to connect a dedicated stereo

audio system in addition to the surround audio system which is already connected to the HDMI or

S/PDIF outputs, you can connect the dedicated stereo audio system to the FL (Front Left) and FR

(Front Right) terminals of the player.

x For the stereo ou

tputs, if the audio system you are connecting to does not have surround speakers,

set the Down Mix option in the Setup Menu to Stereo. If the audio system has surround speakers

and Dolby Pro Logic or other surround audio decoding capabilities, set the down mix mode to “LT/RT”.

(For more information, refer to “Down Mix Mode” on page 68).

For balanced stereo connection please use a set of XLR cables (purchased separately).

Connect one end to the EMP 3 output and the other end, to the input of your preamplifier

or integrated amplifier.

Audio Interconnect Cables

AUDIO/VIDEO MULTI-CHANNEL

RECEIVER

Receiver/Amplifier with 7.1ch Audio Input

FRONT SURROUND SUBWOOFER S. BACK

CENTER

Balanced XLR connection