User guide

INSTALLATION
21
Custom Installation
External IR (Infrared Remote) Installation
The PBD 1 features an IR IN port on its back panel. If the player is to be installed in an equipment cabinet
where direct line-of-sight is not available for the remote control, you can purchase an external IR Remote
Sensor and plug it into the IR IN port. Place the sensor head at a location where there is direct line-of-sight to
ensure reliable operation.
NOTE
x When an external IR sensor is plugged in, the original IR sensor window on the front panel
will be disabled.
x We cannot guarantee that the IR IN port will be compatible with devices that are not
manufactured by us. Connecting the IR IN port to an incompatible device may result in
damage to the connected device or the player.
x Please contact our customer support if you plan to integrate the player into an IR
distribution system. Customer support can provide recommendations on how to properly
connect the control signals.
RS232 Control
The PBD 1 has an RS232 control port and can be integrated into most custom home theater control systems.
Please ask your custom installer to contact Electrocompaniet for the RS232 control protocol,for the latest version
of RS-232 protocol document.
3.5mm Mono Cable
External IR Remote Signal
IR IN Signal Identifications
Tip: IR carrier signal
Sleeve: Ground
3.5mm Mono Plug