User guide

SETUP MENU OPTIONS
72
Device Setup
The Device Setup section of the Setup Menu system allows you to configure additional player options related
to the hardware and control functions.
1. Firmware Information: Displays the currently installed firmware version.
2. Firmware Upgrade: Upgrades the player’s firmware. This operation is only available when the
playback is completely stopped or when there is no disc loaded.
The firmware is the system software that controls the features and functions of the player. Since the
Blu-ray Disc specifications are new and evolving, it is possible that a Blu-ray Disc manufactured after
the player was manufactured uses certain new features of the Blu-ray Disc specifications. To ensure
the best possible viewing experience, the player may need a firmware update from time to time.
Please visit the Electrocompaniet eb site www.electrocompaniet.no
to check for firmware updates and
instructions on installing the updates.
There are three ways to upgrade the player’s firmware:
x Via USB – You may download the firmware files from the our web site to a USB
drive and then use the USB dr
ive to upgrade the player. Please follow the instructions on the
firmware download web page.
x Via Disc – You may download a sftware updates from the our web site and burn an upgrade disc.
x Via Net
work – If the player has a working Internet connection (see pages 19 and 76), you
may upgrade the player directly over the Inter
net. Please follow the instructions on your TV
screen.
3. Firmware Notification: Allows you to set whether the player should automatically check for new
firmware versions on the Internet server and notifies you about new firmware.
x On – Checks for firmware updates automatically and notifies the user about new firmware.
Requires a working network connection.
x Off
– Does not check for new firmware version automatically.
4. Remote Control Code: The PBD 1 can respond to one of four sets of remote control codes. The
default is “Code 1”. If you have other our products in the vicinity of the PBD 1, the other
products may respond to the PBD 1 remote control. To prevent this, you
can select a different
remote code. The available codes are:
ᶆᶯᶦᶳᶨᶺᵡᶆᶧᶧᶪᶤᶪᶦᶯᶵᶔᶵᶢᶯᶥᶣᶺᵡᶎᶰᶥᶦ