User manual
- 12 -
OPERATING INSTRUCTIONS
CONNECTING POWER
The USB Charging Alarm Clock Radio is equipped with an "AUTO TIME SET" feature.
When power is connected, the clock display will ash '2' which is TIME ZONE 2
(Eastern time) and the default TIME ZONE setting. The correct time will be displayed,
unless you are in another time zone.
To select TIME ZONE 2 (Eastern time) as your default time zone:
• Press ONCE to conrm your selection.
To change your time zone upon setup:
• Press
/ DST/°C °F until your own time zone appears on the display; press
ONCE to conrm your selection.
To change your time zone after setup:
• Press and hold the TIME ZONE/SNOOZE/SLEEP/DIMMER button until numbers ash.
• Press
/ DST/°C °F until your own time zone appears on the display; press
ONCE to conrm your selection.
There are 8 programmed times zones:
BATTERY BACKUP
This alarm clock is equipped with a battery backup feature. This feature will restore your
alarm clock settings in the event of a power outage. The 3V, CR2032 Flat Lithium battery
is pre-installed at the factory, however, should you need to replace the battery, please
read the following instructions.
Zone 0 - Newfoundland time
Zone 1 - Atlantic time
Zone 2 - Eastern time (default)
Zone 3 - Central time
Zone 4 - Mountain time
Zone 5 - Pacic time
Zone 6 - Yukon time
Zone 7 - Hawaiian time
OPERATING INSTRUCTIONS