User manual

- 18 - - 19 -
6. Press the SET/NAP button again to set the preset.
7. Repeat steps 2 through 4 to set more presets.
8. To recall a preset station, press the SET/NAP button once to view current preset;
press the SET/NAP again until desired preset station appears on the LED panel.
The unit supports up to 10 AM & 10 FM preset stations.
USB Charging Function
This alarm clock is equipped with a convenient USB charging port on the back panel that
allows you to recharge many brands of smartphones, tablets and portable music players
that come with USB charging cables. To charge your device, connect the USB charging
cable that is connected to your handheld device to the USB charging port on the back
panel of this alarm clock.
IMPORTANT!
When connecting your USB cable to the USB port on this alarm clock please be sure
that the USB symbol on your plug is facing UP when you insert the plug into the
USB port. Observe the charging indicator on your device to conrm that it is charging. If
your device is not charging when the USB selector switch is in the ‘A’ position, slide the
selector switch to the ‘B’ position to begin charging. To improve charging eectiveness,
please turn o and/or refrain from using your device while charging.
Charging time will vary depending on the charging current that your device requires.
Therefore, some devices will take longer to charge than others.
PROJECTION UNIT
The Projection Unit will project the Time or the Temperature on a wall or ceiling of a
darkened room (Max. distance is 3-9 feet). To display the temperature, press and hold
the 180° ip button. You can ip the projected image 180° by pressing the 180°
ip button ONCE (time or temperature). To turn the projected image OFF, press the
projection on/o button. Turn the Focus Adjustment Wheel until the projected time/
temperature is clearly shown on the ceiling or wall.
CYCLE DISPLAY
The CYCLE DISPLAY function displays the TIME, YEAR, MONTH/DAY & CURRENT
TEMPERATURE on the front LED panel in sequence.
1. Press and hold the display button on the front of the alarm clock until ‘ON’ appears on
the LED panel. Please wait 10 seconds for the cycle to begin.
2. To return to TIME display only, press and hold until ‘OFF’ appears on the LED panel.
ADJUSTING LED BRIGHTNESS
You can adjust the brightness of the LED display making it brighter, dimmer or even turning it
OFF when the radio is OFF. There are four dimming options available: HIGH/MEDIUM/LOW/OFF
Standby. Press the DIMMER/GRADATEUR button to toggle between the four brightness settings.
LISTENING TO THE RADIO
1. Press the POWER ON/OFF button on the front panel to turn the radio 'ON'.
2. Press the AM / FM button to toggle between AM and FM radio bands.
3. Press the / DST/°C °F buttons once, to move back/move forward one station
at a time.
4. Press and hold the / DST/°C °F buttons for one second to scan back/forward
through the stations; the unit will automatically scan to the next broadcasting station.
5. Press and hold the POWER ON/OFF button on the front panel to turn the radio 'OFF'.
Please ensure that the FM antenna is completely unrolled and extended for best FM reception. The
AM band uses an internal directional aerial. For best reception, please rotate the radio.
TO SET / RECALL THE RADIO PRESETS
1. Press the POWER ON/OFF button on the front panel to turn the radio 'ON'.
2. When the radio is 'ON', press the AM / FM button to toggle between AM and FM
radio bands.
3. Use the / DST/°C °F buttons to select the desired radio station.
4. Press the SET/NAP button; 'P02' will blink in the display.
5. Use the / DST/°C °F buttons to toggle to the desired preset
'P01-P10' number.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS