User manual
- 20 - - 21 -
Please consult the Troubleshooting chart below before communicating with
ELECTROHOME Customer Support.
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
GENERAL
Power does not come on AC cord not plugged in Insert plug rmly into AC outlet
RADIO
No Sound Power is not on
Press the POWER ON/OFF button
VOLUME control at minimum
position
Turn the VOLUME control up
Noise or sound distorted
on AM or FM
AM-interference from trac Tune the radio for better AM reception
FM-antenna wire not extended Extend antenna wire
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
CLOCK
Incorrect Time Clock not set Set the clock
Battery is inserted incorrectly,
or depleted
Check/replace the battery
Alarm does not turn on Alarm is not set to turn on
Activate ALARM 1 or ALARM 2
Clock is not set Set the clock
Alarm time is not set Set alarm time for
ALARM 1 or ALARM 2
No display Dimmer is set to Standby Mode Press Dimmer button
1. Disconnect the unit from any power sources before cleaning.
2. Keep the unit away from magnetic objects, water or heat sources.
3. Clean only with a dry cloth.
TROUBLESHOOTING
CARE AND MAINTENANCE
SPECIFICATIONS
Display Size 1.2"
Display Colour LED
Automatic Time Set
Yes
Battery Back-up for Time
Yes
PLL Digital Radio Tuner
Yes
Radio Station Pre-sets
Yes 10 AM / 10 FM
Dual Alarm
Yes
Calendar Display
Yes
Indoor Temperature Reading
Yes
Adjustable Brightness
O, Low, Medium, High
Sleep Timer
Yes
Battery Required
Lithium, Included (3V CR2032)
USB Charging
Yes, 1000mA
Speaker Size
2.0" 0.5W, 8 Ohms
Volume Indicator LED
Yes- numerical display of volume value
Power Adapter Input
100-240V 50-60 Hz
Power Adapter Output
5V 1200mA
Frequency Range (AM) 520-1710 kHz
Frequency Range (FM) 87.5-107.9 MHz
Power Supply AC 7.5V 1000mA
Projection Swivel Tilt 180°
Number of Alarms 2 - with optional weekend skip
Screen Size 4.0"
Alarm Options Gradual Radio / Buzzer
Projection Time / Temperature Yes
Projection Focus Yes
Projection Flip Yes