User manual
- 5 -
WARNING
TO PREVENT ELECTRIC SHOCK; DO NOT USE THIS PLUG WITH AN EXTENSION CORD
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURES. TO PREVENT FIRE OR SHOCK HAZARD; DO NOT
INSTALL THIS PRODUCT IN A CONFINED SPACED SUCH AS A BOOK CASE OR
SIMILAR UNIT.
IMPORTANT SAFETY INFORMATION
LASER SAFETY
The unit uses a laser. Only a qualied service
technician should remove the cover or attempt to
service this product to avoid possible eye injury.
CAUTION: USE OF CONTROLS OR ADJUSTMENT
OF PERFORMANCE OR PROCEDURES OTHER
THAN SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
LASER SAFETY
DANGER
INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCK FAILED OR DEFEATED.
AVOID DIRECT EXPOSURE TO LASER BEAM.
CAUTION: RETAIN THIS MANUAL FOR FUTURE REFERENCE
1. Read these instructions.
2. Keep these instructions.
3. Read all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Clean the screen only with a dry cloth, moistened slightly if needed. Do not clean
the inside ofthis product.
8. Check that the power voltage stated on the rating label corresponds to your local
electricity supply.
9. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
10. Do not place this product near any heat sources such as radiators, heat registers,
stoves or other apparatus (including ampliers) that produce heat.
11. Do not immerse this product, the power cord or any accessories in water or any
other liquid.
12. Unplug the power adaptor from the wall when the product is unused for a long
period of time and during thunderstorms.
13. Only use attachments / accessories specied by the manufacturer.
14. Unwind and straighten the power cord before use.