Manualshelf

User Manual

ManualsBrandsElectrohome ManualsElectronicsKingston 7-in-1 Vintage Vinyl Record Player Stereo System with 3-Speed Turntable, Bluetooth, AM/FM Radio, CD, Aux in, RCA/Headphone Out, Vinyl/CD to MP3 Recording & USB Playback
12345678910
8
Playing the Radio and Setting Radio Presets
1. Change to FM or AM source
2. Use TUNING knob or and on the unit or and on the remote to change to the desired
station
3. To set as a radio preset press and hold PRESETS on the unit or on the remote to enter preset setting
4. Use tuning knob or and on the unit or and on the remote to select desired preset
number
5. Press PRESETS to set the preset
6. Use PRESETS on the unit or PRESETS and and on the remote to select presets
Note: The RR75 supports up to 9 presets for AM stations and 9 presets for FM stations.
FM
AM
Playing a CD
1. Change to CD source
2. Press the eject button on the front of
the unit
3. Place a CD in the tray
4. Press the eject button to close the tray
5. Use and on the unit or and
on the remote to change songs
6. Hold and or and to rewind/fast
forward
7. Use and on the remote to change folders
on MP3 CDs
8. Press on the unit or on the remote to pause
and resume playback
9. Press PRESETS on the unit or on the remote to
toggle between Repeat Track, Repeat Folder,
Repeat All, and Shuffle
Playing From a Bluetooth® Device
The RR75 can pair to one Bluetooth® device at a time. The amber Bluetooth® Pairing LED will flash when
in pairing mode and will be solid when paired.
The RR75 also features auto-pairing which means that it will re-pair with the last connected Bluetooth®
device when the Bluetooth® source is selected.
1. Change to Bluetooth® source using Bluetooth button on unit or remote
2. Pair to “Electrohome RR75” on your source device (smartphone or tablet)
3. Use the playback buttons on the unit and remote to control playback or use the source device itself
4. Adjust the volume on your source device as well as on the unit
Note: If your device cannot nd “Electrohome RR75”, you can reset Bluetooth® pairing. Press and hold the Bluetooth® button on
the unit or the remote for 3 seconds to reset pairing.
BT
Playing from an AUX Device
1. Connect a 3.5mm Aux cable to the headphone jack on your source device (smartphone or tablet)
2. Connect the other end of the Aux cable to the AUX IN port on the back of the unit
3. Change to AUX source
4. Control playback on your source device
5. Adjust the volume on your source device as well as on the unit
AUX
CD