Datasheet

Page 1

FLU

Fluxclene Cleaning Solvent

FLU is a fast-drying solvent cleaner specially formulated for the quick and efficient removal of flux residues after

soldering. Originally designed to replace ozone depleting solvents such as CFC-113 it exhibits enhanced

cleaning performance and fast evaporation rates, easily giving MIL-STD cleanliness.

• Removes flux residues after soldering; ideal for manual PCB cleaning applications

•

Non-halogenated cleaning solvent; will not attack the ozone layer

• Dries without leaving any residue; leaves a clean, dry surface in one cleaning step

• CO

propelled aerosol version available; 20% more active cleaner and can be used at 360⁰ orientation

Approvals RoHS-2 Compliant (2011/65/EU): Yes

Typical Properties Flash Point (°C) -20

Density @ 20°C (g/ml) 0.78

Inhalation Toxicity (ppm) 300

Residue on Evaporation (ppm) <1

Evaporation Rate 16 (ether = 1)

Description Packaging Order Code Shelf Life

Fluxclene Cleaning Solvent

200ml Aerosol FLU200D 36 months

400ml Aerosol with brush FLU400DB 48 months

400ml Aerosol FLU400D 36 months

1 Litre Bulk FLU01L 72 months

5 Litre Bulk FLU05L 72 months

25 Litre Bulk FLU25L 72 months

Directions for Use

Suitable for removal of a range of flux residues after soldering. Product contains flammable solvent so do not

spray onto live electrical equipment or other sources of ignition. Immerse surface to be cleaned or spray onto

surface to excess and allow to evaporate. A brush or foam tipped bud may be used to remove any stubborn

deposits. For use on large scale production, FLU may be used in ultrasonic cleaning equipment which must be

adapted for use with flammable liquids.

Revision 1: Oct 2013