Datasheet

ManualsBrandsElectrolube ManualsHeat Conducting Films/FoilsSilicone Thermal Gap Pad, Square, 990mW/°C, 200x200x1mm

Table Of Contents

Revision date: 07/11/2016 Revision: 0

SAFETY DATA SHEET

GP300 Thermal Gap Pad

According to Regulation (EC) No 1907/2006, Annex II, as amended.

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Product name GP300 Thermal Gap Pad

Product number GP300, EGP300S, EGP300SL, ZE

1.2. Relevant identified uses of the substance or mixture and uses advised against

Identified uses Heat Dissipation

Uses advised against No specific uses advised against are identified.

1.3. Details of the supplier of the safety data sheet

Supplier ELECTROLUBE. A division of HK WENTWORTH LTD

ASHBY PARK, COALFIELD WAY,

ASHBY DE LA ZOUCH, LEICESTERSHIRE LE65 1JR

UNITED KINGDOM

+44 (0)1530 419600

+44 (0)1530 416640

info@hkw.co.uk

1.4. Emergency telephone number

Emergency telephone +44 1865 407333

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification (EC 1272/2008)

Physical hazards Not Classified

Health hazards Not Classified

Environmental hazards Not Classified

2.2. Label elements

Hazard statements NC Not Classified

2.3. Other hazards

This product does not contain any substances classified as PBT or vPvB.

SECTION 3: Composition/information on ingredients

3.2. Mixtures

Summary of content (8 pages)

PAGE 1
Revision date: 07/11/2016 Revision: 0 SAFETY DATA SHEET GP300 Thermal Gap Pad According to Regulation (EC) No 1907/2006, Annex II, as amended. SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name GP300 Thermal Gap Pad Product number GP300, EGP300S, EGP300SL, ZE 1.2.
PAGE 2
Revision date: 07/11/2016 Revision: 0 GP300 Thermal Gap Pad Aluminium Oxide 60-100% CAS number: 1344-28-1 REACH registration number: 012119529248-35-XXXX Classification Not Classified The full text for all hazard statements is displayed in Section 16. SECTION 4: First aid measures 4.1. Description of first aid measures General information Get medical attention if any discomfort continues. Show this Safety Data Sheet to the medical personnel.
PAGE 3
Revision date: 07/11/2016 Revision: 0 GP300 Thermal Gap Pad Hazardous combustion products Thermal decomposition or combustion products may include the following substances: Harmful gases or vapours. 5.3. Advice for firefighters Protective actions during firefighting Avoid breathing fire gases or vapours. Evacuate area. Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk.
PAGE 4
Revision date: 07/11/2016 Revision: 0 GP300 Thermal Gap Pad 8.1. Control parameters Occupational exposure limits Aluminium Oxide Long-term exposure limit (8-hour TWA): WEL 4 mg/m³ respirable dust Long-term exposure limit (8-hour TWA): WEL 10 mg/m³ inhalable dust WEL = Workplace Exposure Limit 8.2. Exposure controls Protective equipment Appropriate engineering controls Provide adequate ventilation. Good general ventilation should be adequate to control worker exposure to airborne contaminants.
PAGE 5
Revision date: 07/11/2016 Revision: 0 GP300 Thermal Gap Pad Flash point Not available. Evaporation rate Not available. Flammability (solid, gas) Not available. Upper/lower flammability or explosive limits Not available. Vapour pressure Not available. Vapour density Not available. Relative density Not available. Solubility(ies) Not available. Partition coefficient Not available. Auto-ignition temperature Not available. Decomposition Temperature Not available. Viscosity Not available.
PAGE 6
Revision date: 07/11/2016 Revision: 0 GP300 Thermal Gap Pad Acute toxicity - dermal Notes (dermal LD₅₀) Based on available data the classification criteria are not met. Acute toxicity - inhalation Notes (inhalation LC₅₀) Based on available data the classification criteria are not met. Skin corrosion/irritation Animal data Based on available data the classification criteria are not met.
PAGE 7
Revision date: 07/11/2016 Revision: 0 GP300 Thermal Gap Pad 12.1. Toxicity Toxicity Based on available data the classification criteria are not met. 12.2. Persistence and degradability Persistence and degradability The degradability of the product is not known. 12.3. Bioaccumulative potential Bioaccumulative potential No data available on bioaccumulation. Partition coefficient Not available. 12.4. Mobility in soil Mobility No data available. 12.5. Results of PBT and vPvB assessment 12.6.
PAGE 8
Revision date: 07/11/2016 Revision: 0 GP300 Thermal Gap Pad Not applicable. 14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code Transport in bulk according to Not applicable. Annex II of MARPOL 73/78 and the IBC Code SECTION 15: Regulatory information 15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture National regulations Health and Safety at Work etc. Act 1974 (as amended).