Datasheet

Page 1
HFFR
Hexane-Free Flux Remover
HFFR is a fast-drying, n-hexane free solvent cleaner specially formulated for the quick and efficient removal of
flux residues present after soldering. Designed to eliminate the use of ozone depleting solvents such as CFC
113 and hazardous materials such as n-Hexane, it combines excellent cleaning performance of a wide range of
flux residues with fast evaporation rates.
• n-Hexane free, non-halogenated cleaning solvent; safer for the operator and the environment
•
Removes flux residues after soldering; ideal for manual PCB cleaning applications
• Dries without leaving any residue; leaves a clean, dry surface in one cleaning step
• Brush aerosol version available; removes stubborn deposits
Approvals RoHS-2 Compliant (2011/65/EU): Yes
Typical Properties Flash Point (°C) 7 (estimate)
Density @ 20°C (g/ml) 0.78
Inhalation Toxicity (ppm) 300
Residue on Evaporation (ppm) <1
Evaporation Rate 11 (ether = 1)
Description Packaging Order Code Shelf Life
Hexane-Free Flux Remover 4
00ml Aerosol with brush HFFR400DB 48 months
5 Litre Bulk HFFR05L 72 months
Directions for Use
Suitable for removal of a range of flux residues after soldering. Product contains flammable solvent so do not
spray onto live electrical equipment or other sources of ignition. Immerse surface to be cleaned or spray onto
surface to excess and allow to evaporate. A brush or foam tipped bud may be used to remove any stubborn
deposits. For use on large scale production, HFFR may be used in ultrasonic cleaning equipment which must be
adapted for use with flammable liquids.
Revision 1: Oct 2013